H07rn-F 16mm2 Rubber Insulated Electric Copper Ground Super Flexible Machine Cable Power Welding Cable

 
Standard
 
Welding cable implement IEC60245-6 or UL1276 or AS/NZ 5000.1

1  TYPE  IEC60245  Welding cable
 
1) Nominal area: 10~185mm2
2) Conductor: class 5 tinned or plain copper wire
3) No. of cores: 1
4) Insulation: rubber compound,
5) The products available include:
60245IEC 81: rubber sheathed arc welding electrode cable
60245IEC 82: polychloroprene or other equivalent synthetic elastomer sheathed arc welding electrode cable

Welding Cables are flame retardant, oil resistant, resilient, resists compression cuts and abrasion, durable, and survives rough handling. Designed for use as arc welding leads from the secondary side of the power source, typical of welders and welding generators. welding machine with a secondary side connected toground and welding clamp used.

1. Soft Cables, having good bending properties
2. The sheath material made of natural rubber or chloroprene rubber mixture, 
can be applied to different situations, good electrical physical properties
3. Chloroprene rubber mixture with heat oil and retardant performance
4. The maximum continuous operating temperature of the cable is 65 ºC
5.Color:Black, Orange, Red or Yellow Blue jacket, single & double insulated.
6.CE certificate APPROVED 
 

2 TYPE  UL1276 Welding cable
 

CONSTRUCTION:
Conductor: 6 AWG- 500Kcmil Stranded bare copper flexible, fully annealed, Class K, Bare-copper.
Insulation: Ethylene Propylene Diene Monomer EPDM
 

PHYSICAL PROPERTIES:
Temperature rated : -40°C to 90°C Dry, 90°C Wet Oil and Water Resistant Non-Marking Jacket, Lightweight & Very Flexible at Low Temp.

ELECTRICAL PROPERTIES:
Voltage : 600V
Industry approval: ASTM B-172, National Electrical Code 630, ROHS

Features:
• EPDM insulation provides outstanding cut, abrasion and slag resistance
• Resistant to oil, chemicals, water, ozone, & solvents
• Red & black jacket
• Other colors available upon request*

3  TYPE   AS/NZ5000.1  Welding cable

  Conductor: copper,stranded (class5 copper or class 2copper)

  Insulation:xlpe

  Sheath:PVC or TPE

  Rated voltage:0.6/1KV

  Standard:AS/NZS5000.1, AN/NZS3808, AS/NZS1125,AS/NZS1660

  Application:

  For use in switchboard wiring,load banks,welding, battery leads, chargers,jumper,leads, etc 

 Operating characteristics:

1). Rated power-frequency voltage Uo/U: 0.6/1KV.

2). Max. permissible continuous operating temperature of conductor: 90°C
3). Max. short-circuit temperature of the conductor shall not exceed: (5S maximum duration) 140°C

4). The ambient temperature under installation should not below 0°C

5). The bending radius of a cable should not be less than 9 times of the cable diameter.

Details Show

Packing and shipping 

Company information

HeBei huatong wires&cables Group Co.,ltd.

which founded in1993,covers 15,000 square meters.With 400 sets of manufacturing machines and 200 pieces of equipment available for testing and inspecting,the company’s annual mannufacturi-ng capacity has reached 450 minllionUS dollars.

The enterprise has adapted international a-dvanced mannagement standards by fully implementing the accreditation of ISO9001Quality con-trol system, ISO1004 Envrionment management system,and OHSAS18001 Occupational health and safety management system.

Huatong’s products which consist of 15 series of cables and tens of thousands of specifications are widely used in different  key  national projects and industries .Our products are well liked by domestic and international customers that they have been exported to various countries and areas including the US,Netherlands, Italy,Russia,UK,Australia,Ethiopia,Ghaha,congo,Middle East ,and Southeast Asia.

\
FQ

(1).When can I get the price?

We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

(2).How can I get a sample to check your quality?

After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

(3).How long can I expect to get the sample?

After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express account orprepay us if you do not have an account.

(4).What about the lead time for mass production?

Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week.