0.6/1/ 1.8/3 (3.6) Kv XLPE/PVC Power Cable (unarmored) Yjv, Yjlv

Application:
1.8/3kv and below XLPE power cable
This product is suitable for AC rated voltage 1.8/3kv and under transmission line.
Physical and mechanical properties and electric performance accord with GB/T12706-2008 and IEC60502-2005 and IEC60840-2004. 1.8/3kv and below XLPE power cable
Operating characteristic of control cable
1. Laying temperature: ≥ 0º C
2. The continuous permissible operating temperature of conductors shall not exceed 90 º C.
3. During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 250º C
4. Bending Radius: Single core cable: 20D multi-core cable: 15D(D=diameter)
5. Conductor resistance conforms to the international standard IEC60228.
6. Test method for insulation sheath accords with the international standard IEC60811.
7. Conductor DC resistance test, insulation resistance test and AC voltage test are in line with international standard IEC60060.
8. The test method for gas released from the cable material is in line with the international standard IEC60754.
9. The cable in the combustion under certain conditions when the smoke density test method conforms to the international standard IEC61034.
10. The test of the cable under the condition of fire is in accordance with the international standard IEC60332.
11. High voltage cable guide for the selection of conforming to the international standard IEC60183.
12. For the cable short circuit temperature rated voltage not exceeding 0.6/1KV in conformity with the international standard IEC60724.

Specification of control cable

Range of production

Notes:
1. Core number, cross section depends on cable type, voltage.
2. 0.6/1kv, 1.8/3kv using warm water cross-linking method or radiation cross-linking method.

Note:
C. C.: Circular compacted
S. S.: Shaped stranded conductor

Note:
C. C.: Circular compacted
S. S.: Shaped stranded conductor