0.6/1kv 16mm 4 Core Copper PVC Insulated Swa Armored Cable
0.6/1kv 16mm 4 Core Copper PVC Insulated Swa Armored Cable image
Get Latest Price Request a quote
Quick Details
Product Details
0.6/1kv 16mm 4 Core Copper PVC insulated SWA Armored Cable
Application
Armored copper cable is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead distribution system.
It provides higher level of safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost.
Caledonian LV Aerial Bundle Cables are designed to supply 600/1000 volt aerial service for temporary service at construction sites, as a service drop (power pole to service entrance), as a secondary cable (pole to pole) or street lighting.
This over-head cable provides reinforced insulation acc. IEC 61140 and fulfill therefore Class II acc. IEC 61140. It is not flame retardant. But this could be if requested change to a flame retardant cable.
Standard
Basic design to BS 7870 / TNB Specification(IEC 60502) / HD 626 S1 / NFC 33-209 / AS/NZS 3560-1 standards
Construction
Conductor | Aluminium conductor, round stranded compressed (RM). |
Insulation | XPLE compound, UV-resistant. |
Core Identification | 1, 2 resp. 3 raised longitudinal ribs on the surface of the cores. The surface of the neutral core should have at least 12 ribs for cross-sections up to 50 mm² and a minimum of 16 ribs for cores above 50 mm². In the case of five core bundles the surface of the protective core should be smooth. |
Electrical Properties
Rated Voltage | 0.6/1kV |
Test Voltage | 4 Veff kV |
Minimum Laying Temperature | -20°C |
Operating Temperature | -40°C~ +90°C |
Maximum Short-circuit Temperature | 250°C |
Maximum Conductor Temperature | 80°C |
Minimum Bending Radius | 18×OD |
Construction Parameters
BS 7870
Number of Cores x Nominal Cross Section | Overall Diameter | Weight | Maximum Conductor Resistance | Minimum Breaking Load | Current Rating |
---|---|---|---|---|---|
No.×mm² | mm | Kg/Km | Ω/Km | KN | A |
1×16 RM | 8.0 | 74 | 1.910 | 2.5 | 72 |
1×25 RM | 9.0 | 106 | 1.200 | 4.0 | 107 |
1×35 RM | 10.5 | 138 | 0.868 | 5.5 | 132 |
1×50 RM | 11.8 | 182 | 0.641 | 8.0 | 165 |
1×70 RM | 13.0 | 252 | 0.443 | 10.7 | 205 |
1×95 RM | 15.4 | 333 | 0.320 | 13.7 | 240 |
1×120 RM | 17.0 | 408 | 0.253 | 18.6 | 290 |
1×150 RM | 19.0 | 502 | 0.206 | 23.2 | 334 |
1×185 RM | 21.0 | 611 | 0.164 | 28.7 | 389 |
1×240 RM | 24.0 | 801 | 0.125 | 37.2 | 467 |
2×16 RM | 15.6 | 147 | 1.910 | 2.5 | 72 |
2×25 RM | 18.0 | 208 | 1.200 | 4.0 | 107 |
2×35 RM | 20.0 | 277 | 0.868 | 5.5 | 132 |
2×50 RM | 23.5 | 361 | 0.641 | 8.0 | 165 |
2×70 RM | 25.4 | 505 | 0.443 | 10.7 | 205 |
2×95 RM | 30.3 | 666 | 0.320 | 13.7 | 240 |
2×150 RM | 38.0 | 1004 | 0.206 | 23.2 | 334 |
4×16 RM | 18.8 | 286 | 1.910 | 2.5 | 72 |
4×25 RM | 21.2 | 430 | 1.200 | 4.0 | 107 |
4×35 RM | 24.1 | 553 | 0.868 | 5.5 | 132 |
4×50 RM | 27.8 | 746 | 0.641 | 8.0 | 165 |
4×70 RM | 31.8 | 1009 | 0.443 | 10.7 | 205 |
4×95 RM | 37.8 | 1332 | 0.320 | 13.7 | 240 |
4×120 RM | 54.4 | 1632 | 0.253 | 18.6 | 290 |
4×50 + 1×25 RM | 31.9 | 814 | 0.641/1.200 | 8.0/4.0 | 165/107 |
4×50 + 1×35 RM | 31.9 | 845 | 0.641/0.868 | 8.5/5.5 | 165/132 |
4×70 + 1×25 RM | 36.0 | 1105 | 0.443/1.200 | 10.7/4.0 | 205/107 |
4×70 + 2×25 RM | 40.0 | 1217 | 0.443/1.200 | 10.7/4.0 | 205/107 |
4×95 + 1×25 RM | 41.8 | 1438 | 0.320/1.200 | 13.7/4.0 | 240/107 |
4×95 + 2×25 RM | 42.0 | 1544 | 0.320/1.200 | 13.7/4.0 | 240/107 |
4×120 + 1×25 RM | 59.0 | 2050 | 0.253/1.200 | 18.6/4.0 | 290/107 |
Other cross-sections can be offered upon request.
TNB Specification(IEC 60502)
Number of Cores x Nominal Cross Section | Overal Diameter | Weight | Maximum Conductor Resistance | Minimum Breaking Load | Current Rating |
---|---|---|---|---|---|
No.×mm² | mm | Kg/Km | Ω/Km | KN | A |
1×16+1×25 RM | 15.3 | 160 | 1.910 | 2.5 | 72 |
3×16+1×25 RM | 19.0 | 290 | 1.200 | 4.0 | 107 |
3×25+1×25 RM | 23.2 | 400 | 0.868 | 5.5 | 132 |
3×35+1×25 RM | 25.6 | 500 | 0.641 | 8.0 | 165 |
3×50+1×35 RM | 30.0 | 680 | 0.443 | 10.7 | 205 |
3×70+1×50 RM | 34.9 | 920 | 0.320 | 13.7 | 240 |
3×95+1×70 RM | 40.6 | 1270 | 0.253 | 18.6 | 290 |
3×120+1×70 RM | 44.1 | 1510 | 0.206 | 23.2 | 334 |
3×150+1×95 RM | 49.2 | 1870 | 0.164 | 28.7 | 389 |
3×185+1×120 RM | 54.9 | 2340 | 0.125 | 37.2 | 467 |
3×25+1×25+1×16 RM | 23.2 | 470 | 1.910 | 2.5 | 72 |
3×35+1×25+1×16 RM | 25.6 | 560 | 1.200 | 4.0 | 107 |
3×50+1×35+1×16 RM | 30.0 | 740 | 0.868 | 5.5 | 132 |
3×70+1×50+1×16 RM | 34.9 | 980 | 0.641 | 8.0 | 165 |
3×95+1×70+1×16 RM | 40.6 | 1330 | 0.443 | 10.7 | 205 |
3×120+1×70+1×16 RM | 44.1 | 1580 | 0.320 | 13.7 | 240 |
3×150+1×95+1×16 RM | 49.2 | 1940 | 0.206 | 23.2 | 334 |
3×185+1×120+1×16 RM | 54.9 | 2410 | 1.910 | 2.5 | 72 |
Other cross-sections can be offered upon request.
HD 626 S1
number of cores x nominal cross section | outer diameter | total weight | max. conductor- resistance | min. breaking load of conductor strand | current rating in the air 1) |
---|---|---|---|---|---|
mm² | ca. mm | ca. kg/km | Ohm/km | kN | A |
2x 16 RM | 15.6 | 147 | 1.910 | 2.5 | 72 |
2x 25 RM | 18.0 | 208 | 1.200 | 4.0 | 107 |
2x 35 RM | 20.0 | 277 | 0.868 | 5.5 | 132 |
2x 50 RM | 23.5 | 361 | 0.641 | 8.0 | 165 |
4x 16 RM | 18.8 | 286 | 1.910 | 2.5 | 72 |
4x 25 RM | 21.2 | 430 | 1.200 | 4.0 | 107 |
4x 35 RM | 24.1 | 553 | 0.868 | 5.5 | 132 |
4x 50 RM | 27.8 | 746 | 0.641 | 8.0 | 165 |
4x 70 RM | 31.8 | 1009 | 0.443 | 10.7 | 205 |
4x 95 RM | 37.8 | 1332 | 0.320 | 13.7 | 240 |
4x 120 RM | 54.4 | 1632 | 0.253 | 18.6 | 290 |
4x 35 + 1x 35 RM | 30.0 | 694 | 0.868/0.868 | 5.5/5.5 | 132/132 |
4x 50 + 1x 25 RM | 31.9 | 814 | 0.641/1.200 | 8.0/4.0 | 165/107 |
4x 50 + 1x 35 RM | 31.9 | 845 | 0.641/0.868 | 8.5/5.5 | 165/132 |
4x 70 + 1x 25 RM | 36.0 | 1105 | 0.443/1.200 | 10.7/4.0 | 205/107 |
4x 70 + 2x 25 RM | 40.0 | 1217 | 0.443/1.200 | 10.7/4.0 | 205/107 |
4x 70 + 1x 35 RM | 36.2 | 1150 | 0.443/0.868 | 10.7/5.5 | 205/132 |
4x 70 + 2x 35 RM | 40.1 | 1289 | 0.443/0.868 | 10.7/5.5 | 205/132 |
4x 95 + 1x 25 RM | 41.8 | 1438 | 0.320/1.200 | 13.7/4.0 | 240/107 |
4x 95 + 1x 35 RM | 41.8 | 1467 | 0.320/0.868 | 13.7/5.5 | 240/132 |
4x 95 + 2x 25 RM | 42.0 | 1544 | 0.320/1.200 | 13.7/4.0 | 240/107 |
Other cross-sections can be offered upon request.
NFC 33-209
Number of Cores x Nominal Cross Section | Overal Diameter | Weight | Maximum Conductor Resistance | Minimum Breaking Load | Current Rating |
---|---|---|---|---|---|
No.×mm² | mm | Kg/Km | Ω/Km | KN | A |
2×10 RM | 12.8 | 93 | 3.080 | 1.5 | 38 |
4×10 RM | 15.4 | 183 | 3.080 | 1.5 | 38 |
2×16 RM | 14.8 | 129 | 1.910 | 2.3 | 72 |
2×16 RN + 2×1.5 RE | 14.8 | 176 | 1.910/12.100 | 2.3 | 72 |
4×16 RM | 17.8 | 257 | 1.910 | 2.3 | 72 |
4×16 RN + 2×1.5 RE | 17.8 | 304 | 1.910/12.100 | 2.3 | 72 |
2×25 RM | 18.0 | 202 | 1.200 | 3.8 | 107 |
2×25 RM + 2×1.5 RE | 18.0 | 249 | 1.200/12.100 | 3.8 | 107 |
4×25 RM | 21.7 | 404 | 1.200 | 3.8 | 107 |
4×25 RM + 2×1.5 RE | 21.7 | 451 | 1.200/12.100 | 3.8 | 107 |
2×35 RM | 20.8 | 269 | 0.868 | 5.2 | 132 |
2×35 RM + 2×1.5 RE | 20.8 | 316 | 0.868/12.100 | 5.2 | 132 |
4×35 RM | 25.1 | 539 | 0.868 | 5.2 | 132 |
4×35 RM + 2×1.5 RE | 25.1 | 586 | 0.868/12.100 | 5.2 | 132 |
2×50 RM | 23.4 | 352 | 0.641 | 7.6 | 165 |
2×50 RM + 2×1.5 RE | 23.4 | 399 | 0.641/12.100 | 7.6 | 165 |
1×54.6 RM + 3×25 RM | 21.7 | 507 | 0.630/1.200 | 3.8 | 107 |
1×54.6 RM + 3×25 RM + 1×16 RM | 24.3 | 573 | 0.630/1.200/1.910 | 3.8/2.3 | 107/72 |
1×54.6 RM + 3×25 RM + 2×16 RM | 29.7 | 639 | 0.630/1.200/1.910 | 3.8/2.3 | 107/72 |
1×54.6 RM + 3×25 RM + 3×16 RM | 31.1 | 705 | 0.630/1.200/1.910 | 3.8/2.3 | 107/72 |
1×54.6 RM + 3×35 RM | 25.1 | 615 | 0.630/0.868 | 5.2 | 132 |
1×54.6 RM + 3×35 RM + 1×16 RM | 28.1 | 680 | 0.630/0.868/1.910 | 5.2/2.3 | 132/72 |
1×54.6 RM + 3×35 RM + 2×16 RM | 34.3 | 748 | 0.630/0.868/1.910 | 5.2/2.3 | 132/72 |
1×54.6 RM + 3×35 RM + 3×16 RM | 35.9 | 814 | 0.630/0.868/1.910 | 5.2/2.3 | 132/72 |
1×54.6 RM + 3×35 RM + 1×25 RM | 28.1 | 714 | 0.630/0.868/1.200 | 5.2/3.8 | 132/107 |
1×54.6 RM + 3×50 RM | 28.2 | 741 | 0.630/0.641 | 7.6 | 165 |
1×54.6 RM + 3×50 RM + 1×16 RM | 31.6 | 806 | 0.630/0.641/1.910 | 7.6/2.3 | 165/72 |
1×54.6 RM + 3×50 RM + 2×16 RM | 38.6 | 875 | 0.630/0.641/1.910 | 7.6/2.3 | 165/72 |
1×54.6 RM + 3×50 RM + 3×16 RM | 40.4 | 940 | 0.630/0.641/1.910 | 7.6/2.3 | 165/72 |
1×54.6 RM + 3×50 RM + 1×25 RM | 31.6 | 841 | 0.630/0.641/1.200 | 7.6/3.8 | 165/107 |
1×54.6 RM + 3×70 RM | 33.0 | 950 | 0.630/0.443 | 10.2 | 205 |
1×54.6 RM + 3×70 RM + 1×16 RM | 37.0 | 1014 | 0.630/0.443/1.910 | 10.2/2.3 | 205/72 |
1×54.6 RM + 3×70 RM + 2×16 RM | 45.2 | 1083 | 0.630/0.443/1.910 | 10.2/2.3 | 205/72 |
1×54.6 RM + 3×70 RM + 3×16 RM | 47.3 | 1148 | 0.630/0.443/1.910 | 10.2/2.3 | 205/72 |
1×54.6 RM + 3×70 RM + 1×25 RM | 37.0 | 1048 | 0.630/0.443/1.200 | 10.2/3.8 | 205/107 |
1×54.6 RM + 3×70 RM + 2×25 RM | 45.2 | 1150 | 0.630/0.443/1.200 | 10.2/3.8 | 205/107 |
1×54.6 RM + 3×70 RM + 3×25 RM | 47.3 | 1250 | 0.630/0.443/1.200 | 10.2/3.8 | 205/107 |
1×54.6 RM + 3×95 RM | 37.4 | 1176 | 0.630/0.320 | 13.5 | 240 |
1×54.6 RM + 3×95 RM + 1×16 RM | 41.9 | 1243 | 0.630/0.320/1.910 | 13.5/2.3 | 240/72 |
Other cross-sections can be offered upon request.
AS/NZS 3560 Part 1
Number of Cores x Nominal Cross Section | Overall Diameter | Weight | Minimum Breaking Load | Current Rating |
---|---|---|---|---|
No.×mm² | mm | Kg/Km | KN | A |
2×16 RM | 15.0 | 140 | 4.4 | 78 |
2×25 RM | 17.6 | 210 | 7.0 | 105 |
2×35 RM | 19.6 | 270 | 9.8 | 125 |
2×50 RM | 22.8 | 370 | 11.4 | 150 |
2×95 RM | 30.6 | 680 | 15.3 | 230 |
3×25 RM | 19.0 | 310 | 8.8 | 97 |
3×35 RM | 21.1 | 410 | 9.8 | 120 |
3×50 RM | 24.6 | 550 | 11.4 | 140 |
4×16 RM | 18.1 | 290 | 8.8 | 74 |
4×25 RM | 21.2 | 410 | 14.0 | 97 |
4×35 RM | 23.7 | 550 | 19.6 | 120 |
4×50 RM | 27.5 | 740 | 28.0 | 140 |
4×70 RM | 31.9 | 1000 | 39.2 | 175 |
4×95 RM | 36.9 | 1370 | 53.2 | 215 |
4×120 RM | 40.6 | 1690 | 67.2 | 250 |
4×150 RM | 43.9 | 2020 | 84.0 | 280 |
Other cross-sections can be offered upon request.
We are China 0.6/1kv 16mm 4 Core Copper PVC Insulated Swa Armored Cable manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular 11kv Armored Cable Products
Mv 6.35/11kv XLPE Insulation Steel Tape Armored Power Cable
6.35/11kv Aluminum Conductor XLPE Insulation Tape Armored Cable
Mv Armored Cable 11kv XLPE Insulation Steel Tape Armored Cable
6.35/11kv Aluminum Conductor XLPE Insulated Power Cable
11kv Aluminum Conductor XLPE Insulated PVC Cable 1X150sq. mm
Middle Voltage XLPE Cable with Copper Conductor Aluminum Wire Armoured
Popular jytopcable Products
Flexible Cable PVC Insulated Flexible Wire 3X2.5sq. Mm
450/750V Control Cable for Size of 37X1.5
LV Nyry Electric Cable PVC Insulation Steel Wire Armoured
PVC Insulated Wire Copper Wire Electrical Wire
Hot Dipped Galvanized Steel/Stay/Guy Wire
4/0 3/0 2/0 1/0 Bare Copper Cable Copper Clad Aluminum Conductor CCA Wire
Popular PVC Insulated Cable Products
1000V Aluminum XLPE Insulation Swa Power Cable
35kv Copper or Aluminium 4 Core XLPE Insulated Power Cables
600V 16mm2 Stranded Aluminum Conductor SEU Concentric Neutral Cable
600/1000V Multi Cores PVC Unarmoured Power Cable
Reliable 450/750V Control PVC Insulated Electrical Cable
450/750V Cable Aluminum Conductor PVC Insulated Cable to Bs Standards
Popular Steel Wire Armoured Cable Products
0.6/1 Kv 4X50mm2 95 240mm Steel Wire Armoured Power Transmission Cable
Copper Conductor XLPE Insulated Armoured Electrical Cable
1kv, 11kv, 35kv, XLPE Insulation Steel Wire Armoured Cables
High Quality 1/11kv XLPE Insulated Steel Wire Armoured Cable
4 Core Aluminum XLPE/PVC Insualted Swa Steel Wire Armoured Power Cable
0.6/1kv Low Voltage Steel Wire Armoured PVC/XLPE Insulated Jacket Electric Power Cable
Tags: 11kv Armored Cable, jytopcable, PVC Insulated Cable, Steel Wire Armoured Cable