1kv PVC Copper Cable 5X70mm with Steel Wire Armored

Low Voltage LV 0.6/1kv Copper Conductor PVC Insulated Steel Wire Armored Power Cable  
1KV SWA cable
swa cable 5x70mm

1. Operating Characteristics
Rated voltage: 0.6/1(1.2)kV
Max. Permissible continuous operating temperature of conductor: 70 ° C
Max. Temperature of conductor during short-circuit (5s max. Duration) shall not exceed:
Nominal cross section of conductor ≤ 300mm2: 160 ° C
Nominal cross section of conductor >300mm2: 140 ° C
The ambient temperature under installation should not be lower than: 0 ° C
The bending radius of cable is recommended as following:
For single core cable: Not less than 15 times of the diameter of cable
For multi-core cable: Not less than 12 times of the diameter of cable
When the armored single core cable used for Alternative Current(AC) system, the armoring material should be non-magnetic.

2. Application
The cable is used for fixed installations such as electric power distribution networks or industrial installations, which is laid in high fall area, able to bear external mechanical force, and certain pulling force.

3. Manufacturing Standards
IEC 60502-1 & Chinese national standard GB/T 12706-2008 We can produce above cables according to popular international standards such as ASTM, BS, DIN, NF &AS/NZ also.

NOTE:
If you want to know more details about this kind of products, please visit our website(homepage) because we have no ways to show so much information on this platform. Thank you.

Main technical data of 0.6/1KV, five cores, Copper conductor, PVC insulated, galvanized steel wire armored and PVC or PE sheath cables 
CABLE CONSTRUCTION 0.6/1KV CU/PVC/SWA/PVC or PE
 

Note: RE= round conductor   RM = stranded conductor   SM=sectional conductor

 Main technical data of 0.6/1KV, five cores, Aluminum conductor, PVC insulated, galvanized steel wire armored and PVC or PE sheath cables
CABLE CONSTRUCTION 0.6/1KV AL/PVC/SWA/PVC or PE

Note: RE= round conductor   RM = stranded conductor   SM=sectional conductor
 

Why Choose us?   

For over 20 years, Zhengzhou Jinyuan Wire and Cable Co., Ltd., as a professional cable manufacturer has been producing customized cable for a wide range of applications based on high quality, excellent service and competitive market prices. This is an elite team with experienced personnel and strong technical support. Our achievements benefit by having access to the largest market for cheap labor and abundant resources in China and our determination to exceed our clients’ expectations.

PRODUCTS & STANDARDS

We can produce all kinds of cables and wires, such as

Bare Conductor: AAC, AAAC, ACSR, ACSR/AW, ACAR, ACSS, ACSS/AW, Aluminum Clad Steel Wire/Strand, Bare Copper Conductors, Copper Clad Steel Wire/Strand, Copper Clad Aluminum(CCA), Galvanized Steel Wire/Strand, etc.

Overhead Insulated Cable: Covered Line Single Core Cable and Aerial Bundled Cable (ABC). ABC includes Duplex, Triplex, Quadruplex and more Cores Service Drop Cable.

PVC Insulated Wire up to 450/750V

PVC or XLPE Insulated Power Cable from 1kV to 36kV

Control Cable

Welding Cable

Rubber Cable

We can produce cables according to the standards of IEC, ASTM, EN (BS, DIN, NF, etc.), AS/NZ and meet customers’ special requirements.

ACHIEVEMENTS & COMMITMENT

Our cable has been exported to South-East Asia, South Asia, Middle-East, Europe, North and South America, Africa, Australia & New Zealand and so on. Zhengzhou Jinyuan Wire and Cable Co., Ltd.’s commitment is to be recognized as a zero-defect world class manufacturer in cable industry through continuous improvement of our quality, processes, and products, and by our determination to exceed our clients’ expectations. 

Welcome to contact us for more information about the 10kv cable, 10kv xlpe cable or other cables.

1. Is it a cable factory?      

Definitely, we are a wire and cable Manufacturer with 23 years history, our factory located in Zhengzhou, Henan Province,China.

2. Any certificates:

Yes, the CE and ISO 9001:2008 are available.

For bare conductors there are Type Test Report available

3. What Standards you are using?

We can producing the wire and cables according to the popular Standards, such asIEC, ASTM, BS, DIN,SANS,CSA or as the clients requirements

4. OEM services?

Yes, We supply OEM services.

5. Delivery time

It depends on the cable type and quantity you need, you can contact us for the details

6. Payment terms: 

Usually we would prefer L/C, T/T, or negotiate with us.

7. Packing

Usually it is packing in coil for PVC builing wire, for the powe cable and bare conductors used to packing by Drums, or as clients requirements.