24kv Expulsion Fuse Element
24kv Expulsion Fuse Element image
Get Latest Price Request a quote
Quick Details
Product Details
TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Specify and attach catalog technical of the proposed model by the manufacturer |
|
Specify data | |
Structural bandage for shielding | |
Steel | |
in hot dip according to ASTM A 153 |
|
Galvanized in hot dip | |
ANSI C 135.2ASTM A-153, | |
ISO-9001 or recent | |
Fiberglass (impregnated with urethane) |
|
"A Rubber Mastic Tape 1" x 10 ‘ " |
|
"Una Tape Armorcast – Structural " |
|
A pair of Latex Gloves for your application | |
Water |
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless
steel. The fuse cutout type MZ has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn’t allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DI
CONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.
We are China 24kv Expulsion Fuse Element manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Drop out Fuses Products
T-Connectors for Tubular Bus-Bar Type Mgt/a
Polymer Fuse Cutout, Drop out Fuses 15 Kv 200A
T-Connectors for Tubular Bus-Bar Type Mgt/C
Popular Fuse Cutout Products
AC Outdoor High Voltage Fuse Cut-out 11kv Drop out Fuse with Polymer Insulator
12kv-15kv Model Hv-32 Outdoor Fuse Cutout
Polymer Fuse Cutout, Drop out Fuses 24 Kv 300A
Jns 4 Core Clustered Type Tensioon Clamp
33kv Polymer Housed Cutout Fuse Cfs-1A-33-740
33kv, 36kv Composite Rubber Cutout Fuse 200A
Popular High Voltage Fuse Products
Polymer Fuse Cutout, Drop out Fuses 33kv 200A
Sandy Finish Nitrile Glovespolyester Linerblack 7-11
11kv Polymer Cut-out Fuse/Fuse Cut-out/Dropout Fuse
Polymer Fuse Cutout, Drop out Fuses 15 Kv 200A
Connector, Oklip 250-300 / 6-350 Kvsu31
Popular jgtrade1 Products
24-27kv 100A Silicon Rubber Drop-out Fuse Cutout
Overhead Line Fittings-Insulation Piercing Connector
Earthing Rod 50X5X3 with Clamp
Type for Ground Rod to Earthwire
Isoladores De Porcelana Insulator
Outdoor off Load Disconnect Switch
Tags: Drop out Fuses, Fuse Cutout, High Voltage Fuse, jgtrade1