36kv Expulsion Fuse Element
36kv Expulsion Fuse Element image
Get Latest Price Request a quote
Quick Details
Product Details
TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless
steel. The fuse cutout type MZ has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn’t allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DI
CONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.
We are China 36kv Expulsion Fuse Element manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Drop out Fuses Products
Tubular Bus-Bar Supports Type Mgg1
Polymer Fuse Cutout, Drop out Fuses 12 Kv 200A
Polymer Fuse Cutout, Drop out Fuses 27kv 100A
11kv Expulsion Fuse C/W Holder.
Tubular Bus-Bar Supports Type Mgg
Popular Fuse Cutout Products
Outdoor Expulsion Drop-out Type Distribution Fuse Cutout Series
33kv High Voltage Ceramic Drop out Fuse Cutout
24kv Polymer Silicon Cutout Fuse Cfs-1A-24-540 a Dropout Fuse Polymeric Fuse Dropout 33kv 11kv
House Service Cutout Fuse Polymer Fuse Cutout Holder Cutout
11kv High Voltage Electrical Distribution Standard Fuse Cutout
Polymer Fuse Cutout, Drop out Fuses 15 Kv 300A
Popular High Voltage Fuse Products
Latex Glovesacrylic Linerblack 7-11
10 Gauge Knitted Gloves with PVC Dotscotton/Polyesterunbleached/Bleached White7-11
Polymer Fuse Cutout, Drop out Fuses 33kv 200A
Standard High Voltage Cutout Distribution
Popular jgtrade1 Products
12-72.5kv Anti-Pollution Solid-Coke Post Porcelain Insulator
11kv Porcelain Station Post Insulator
Driving Gloves Made of Cow Hide Leather
Tags: Drop out Fuses, Fuse Cutout, High Voltage Fuse, jgtrade1