600V, Underground Service Entrance Cable, Rhh/Rhw/Use

APPLICATIONS Suitable for use as follows:

Type RHH or RHW-2 or USE-2 conductors are used with conduit as specified
In the National Electrical Code 1
When used as Type USE-2, conductor is suitable for use as underground service entrance
Cable for direct burial at conductor temperatures not to exceed 90° C
When used as RHH, conductor temperatures shall not exceed 90° C in dry locations
When used as RHW-2 or USE-2, conductor temperatures shall not exceed 90° C in wet
Or dry locations
Voltage rating for RHH or RHW-2 or USE-2 conductors is 600 volts

STANDARDS & REFERENCES

Type RHH or RHW-2 or USE-2 conductors are used with conduit as specified
In the National Electrical Code 1
When used as Type USE-2, conductor is suitable for use as underground service entrance
Cable for direct burial at conductor temperatures not to exceed 90° C
When used as RHH, conductor temperatures shall not exceed 90° C in dry locations
When used as RHW-2 or USE-2, conductor temperatures shall not exceed 90° C in wet
Or dry locations
Voltage rating for RHH or RHW-2 or USE-2 conductors is 600 volts

CONSTRUCTION

Type RHH or RHW-2 or USE-2 copper conductors are annealed (soft) copper.
Insulation is an abrasion, moisture, heat, and sunlight resistant black cross-linked
Polyethylene (XLP).

SPECIFICATIONS

Conductors shall be UL-listed Type RHH or RHW-2 or USE-2, suitable for operation at
600 volts or less in wet or dry locations, including direct burial in the earth.
Conductors shall be annealed copper, cross-linked polyethylene (XLP) insulated,
As manufactured by Southwire Company or approved equal.