795 ACSR Wire ASTM Raven Swan Crow Pelican Linnet Condor Rail Finch Hawk Hen Dove Conductor

Brief Description:

This conductor is made from aluminium-magnesium-silicon alloy of high electrical conductivity containing enough magnesium silicide to give it better mechanical properties

 after treatment. These conductors are generally made out of aluminium alloy 6201. 

AAAC CONDUCTOR has a better corrosion resistance and better strength to weight ratio and improved electrical 

conductivity than ACSR CONDUCTOR on equal diameter basis.

Applications:

AAAC aluminum alloy conductors are extensively used for overhead distribution and transmission lines adjacent to 

ocean coastlines where there can be a problem of corrosion in the steel of an ACSR construction.

 The aluminum alloy conductors are used in place of single-layer ACSR conductors (i.e., #6 to #4/0 AWG) to reduce power losses in overhead distribution and transmission 

lines. The inductive effect of the ACSR’s steel core is eliminated, hence increasing the operating efficiency of the line.

Construction:

Standard 6201-T81 high strength aluminum conductors, conforming to ASTM Specification B-399,

 are concentric-lay-stranded, similar in construction and appearance to 1350 grade aluminum conductors. Standard 6201 alloy 

conductors are similar to other alloy conductors commercially known as Ardival, Aldrey or Almelec. 

They were developed to fill the need for an economical conductor for overhead applications requiring higher 

strength than that obtainable with 1350 grade aluminum conductors, but without a steel core.

The DC resistance at 20"C of the 6201-T81 conductors and of the standard ACSR of the same diameter are approximately the same. 

Conductors of the 6201 J81 alloys are harder and, therefore, have a greater resistance to abrasion than conductors

 of 1350-H 19 grade aluminum.

Features and Benefits:

Aluminum alloy conductors have a number of advantages over the use of the ACSR or all aluminum conductors. 

Lower power losses than for equivalent single aluminum-

layer ACSR conductors. (The inductive effect of the steel core in the ACSR is eliminated).

• Simpler fittings than those required for ACSR.

• Excellent corrosion resistance in environments conducive to galvanic corrosion in ACSR.

• Strength and sag approximately the same as for equivalent 6/1 and 26/7 ACSR conductors.

• Outside diameters are the same as for standard ACSR conductors, permitting interchangeability of fittings.

• Greater resistance to abrasion than that for 1350 wires in all-aluminum or ACSR conductors.

Key Benefits:

· High tensile strength as compared to AAC conductor.

· Higher conductivity as compared to ACSR conductor.

· Better corrosion resistance than ACSR conductor.

Physical contents of alluminium alloy :

· Density – 2.70 kgm/dm3 at 20°C

· Coefficient of Linear Expansion – 23 x 10-6 / °C

· Resistivity – 0.0326 Ohms mm2/m at 20°C

· Constant Mass Temperature Coefficient (a) – 0.00360/ °C

· Material – Heat treated Al. Mg. Si. Alloy

Package:In coils, wooden drums, steel drums or steel-wooden drums.

We could producing according to the customers’ requirements.Welcome your request for any quotations!

Products Pictures

Production Equipment

Package

Sales Map

Our company

Yifang Electric group mainly specialized in wire&cables,including designment,production and sale.

Products are mainly covering low,medium,high voltage(1KV to 220KV) XLPE Insulated power cable,PVC insulated power cable,ABC cable,building cable control cable,rubber cable welding cable Etc.

Our XLPE cable can be manufactured according to the company’s specification which is equivalent to IEC 60502,IEC60332,IEC60754. Some indexes are superior to above international standard.

Our certificate

FAQ

1.Q:Are you a factory or trading company? 
 A: Manufacturing base in Henan ,China, with more than 500 workers.

2.Q:How can I visit there? 
 A: Sure,If you need,we will arrange the driver to pick you up. 

3.Q:How can I get some samples? 
 A: Contact me on below,Determin sample and address for shipping.  

4.Q:Have you ever supplied cables to our country? 
 A: Yifang Cables have been sold to over 100 countries and regions in the world. can you contact me for details.

5.Q:What is your MOQ? 
A: MOQ Normally 500 meters for big diameter cables.Please contact me for detail info if you have specific cable requirement. 

6. Q:When can I get the price? 
A: Usually quote within 6 hours after we get your inquiry. 

7.Q:How long is your delivery time?
 A: According to your order’s quantity.Usually our lead time is 3 – 20 working days.