10kv Aluminum Cable Steel Tape Armored Cable 3X150mm

10kv aluminum cable
10kv steel tape armored cable
10kv cable 3x150mm2

10kv AL/XLPE/STA/PVC(or PE) Power Cable 
10kv Aluminum Cable Steel Tape Armored Cable 3X150mm
 
 
1. Description
Construction: Compacted stranded circular aluminum conductor, extruded semi-conducting compound as conductor shield, cross-linked polyethylene (XLPE) insulation, semi-conducting compound as insulation shield, copper tape or combination of copper wire and tape as metallic screen, three cores assembled together with non-hygroscopic polypropylene filler, wrapped with binder tape, PVC inner covering as armoring bedding, double galvanized steel tape armored, PVC or PE outer sheath.
 

 
2. Operating Characteristics
Rated voltage U0/U(Um): 6.35/11(12)kV
 
U0 is the rated power frequency voltage between conductor and earth or metallic screen for which the cable is designed; U is the rated power frequency voltage between conductors for which the cable is designed;
Um is the maximum value of the "highest system voltage" for which the equipment may be used.
 
Max. permissible continuous operating temperature of conductor: 90 °C
 
Max. temperature of conductor during short-circuit (5s max. duration) shall not exceed: 250 °C The ambient temperature under installation should not be lower than: 0 °C
The bending radius of cable is recommended as following:
 
For single core cable: not less than 15 times of the diameter of cable
 
For three core cable: not less than 12 times of the diameter of cable
 
When the armored single core cable used for Alternative Current(AC) system, the armored material should be non-magnetic.
 
3. Application
The cable is used for fixed installations such as electric power distribution networks or industrial installations, which is laid indoors, outdoors, in tunnel, in cable trench, or direct in ground, able to bear external mechanical force, but unable to bear large pulling force.
 
4. Manufacturing Standards
IEC 60502-2 and Chinese National Standard GB/T 12706-2008
 
We can produce above cables according to popular international standards such as ASTM,BS,DIN,NF &AS/NZ also.
 

 
5. Main technical data
 
 
5.1 Main technical data of 10kv, Single core, Aluminum conductor, XLPE insulated, double galvanized steel tape armored and PVC or PE sheath cable
CABLE CONSTRUCTION: 6.35/11KV AL/XLPE/DSTA/PVC or PE
 

 
 
5.2 Main technical data of 6.35/11KV Single core, Aluminum conductor, XLPE insulated, copper wire screened, double galvanized steel tape armored and PVC or PE sheath cable
CABLE CONSTRUCTION:  6.35/11KV AL/XLPE/CWS/DSTA//PVC or PE
 

 
5.3 Main technical data of 6.35/11KV, three cores, Aluminum conductor, XLPE insulated, double galvanized steel tape armored and PVC or PE sheath cable
CABLE CONSTRUCTION: 6.35/11KV AL/XLPE/DSTA/PVC or PE
 

1. Is it a cable factory?      

Definitely, we are a wire and cable Manufacturer with 23 years history, our factory located in Zhengzhou, Henan Province,China.

2. Any certificates:

Yes, the CE and ISO 9001:2008 are available.

For bare conductors there are Type Test Report available

3. What Standards you are using?

We can producing the wire and cables according to the popular Standards, such asIEC, ASTM, BS, DIN,SANS,CSA or as the clients requirements

4. OEM services?

Yes, We supply OEM services.

5. Delivery time

It depends on the cable type and quantity you need, you can contact us for the details

6. Payment terms: 

Usually we would prefer L/C, T/T, or negotiate with us.

7. Packing

Usually it is packing in coil for PVC builing wire, for the powe cable and bare conductors used to packing by Drums, or as clients requirements.