Yh5wz 35kv Zinc Oxide Arrester for High Voltage Power Station

China 
                Yh5wz 35kv Zinc Oxide Arrester for High Voltage Power Station
              manufacture and supplier

Yh5wz 35kv Zinc Oxide Arrester for High Voltage Power Station image

Get Latest Price Request a quote

Basic Info.

Model NO.
YH5WZ

Arc-extinguishing Medium
Air

Installation
Fixed

Structure
ACB

Poles Number
1

Type
Circuit Breaker

Function
Conventional Circuit Breaker

Certification
ISO9001-2000, CCC

Defense
Secure

Transport Package
Material Flow

Specification
35KV

Trademark
CNKC

Origin
China

Production Capacity
5000pieces/Year

Packaging & Delivery

Package Size
16.00cm * 16.00cm * 63.00cm

Package Gross Weight
25.000kg

Product Description

Product Description

Surge arrester is a kind of overvoltage protector, which is mainly used to protect various electrical equipment (transformers, switches, capacitors, wave arresters, transformers, generators, motors, power cables, etc.) in power systems, railway electrification systems, and communication systems. ) is protected from atmospheric overvoltage, operating overvoltage and power frequency transient overvoltage, etc., and is the basis for the insulation coordination of power systems.
The core element (resistor sheet) of the metal oxide arrester adopts an advanced formula based on zinc oxide, which has very excellent nonlinear (volt-ampere) characteristics, that is, under normal operating voltage, the current passing through is only microampere level. , When subjected to overvoltage, the passing current reaches thousands of amperes instantaneously, making the arrester in a conducting state and releasing overvoltage energy, thereby effectively limiting the damage of overvoltage to power transmission and transformation equipment.
The traditional SiC arrester has the disadvantages of high steep wave discharge voltage caused by steep wave discharge delay, and high operating wave discharge voltage due to large operating wave discharge dispersion. The zinc oxide arrester has the advantages of good steep wave response characteristics, no delay to the steep wave voltage, low operating residual voltage, and no discharge dispersion. The protection margin of steep waves and operating waves is greatly improved, and in terms of insulation coordination, the protection margins of steep waves, lightning waves and operating waves can be nearly the same, thus providing the best protection for power equipment..
The composite jacket metal oxide arrester adopts the overall injection molding and two-end encapsulation process, with good sealing performance, excellent explosion-proof performance, pollution resistance, no cleaning, and can reduce the occurrence of wet flash in foggy weather, electric corrosion resistance, anti-aging, small size, light weight , easy to install and maintain. It is a replacement product of porcelain sleeve arrester.

Model Description

Product technical parameters and selection

Product Structural features and scope of use

1. Small size, light weight, collision resistance, no damage to transportation, flexible installation, suitable for use in switch cabinets
2. Special structure, integral molding, no air gap, good sealing performance, moisture-proof and explosion-proof
3. Large creepage distance, good water repellency, strong dirt resistance, stable performance and reduced operation and maintenance
4. Zinc oxide resistor with unique formula, small leakage current, slow aging speed and long service life
5. The actual DC reference voltage, square wave current capacity and high current tolerance are higher than the national standard
Power frequency:48Hz ~60Hz
-Ambient temperature:-40°C~+40°C
-Maximum wind speed: not exceed 35m/s
-Altitude: not exceed 2000m
-Earthquake intensity: not exceed 8 degrees
-Ice thickness: not exceed 10 meters.
-Long-term applying voltage does not exceed the maximum coutinuous operating voltage.

Product Specifications and Production Process

Product implementation standards and user notices

The production standard of the product is GB11032-2000 (eqv IEC60099-4:1991) “AC No-gap Metal Oxide Surge Arrester”, JB/8952-2005 “Composite Jacket No-gap Metal Oxide Surge Arrester for AC System”
1. The arrester should be stored in a clean and dry room before installation and use. Must not be corroded by corrosive gases or liquids.
2. Before the arrester is put into operation, a preventive test should be carried out. After being put into operation, it should also be regularly (10KV and below arrester once every 5 years, 35KV and above arrester once every 2 years)
Do the following test and compare with the data before operation with reference to the attached table:
a. Measure the insulation resistance of the arrester
b. Measure the DC 1mA voltage of the arrester
c. Measure the leakage current of 0.75 times DC 1mA

Product details

Products real shot

A corner of the production workshop

Product packaging

Product application case

 

 
/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

We are China Yh5wz 35kv Zinc Oxide Arrester for High Voltage Power Station manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote

Popular cnkcele Products

Zw32-40.5kv 630-1250A Outdoor Permanent Magnet High Voltage Vacuum Circuit Breaker

Sh15 50-2500kVA 6-11kv New Three Phase Fully Sealed Oil Immersed Power Transformer

Es/PS Series 1kv 25-95mm² Fixed Suspension Clamp of Overhead Cable

Dl 16-800mm² 8.4-21mm Aluminium Connecting Terminal Cable Lug Electric Power Fitting

Gw5 630A 1250A 1600A 2000A 35kv Outdoor Substation High Voltage Isolating Switch

Nll 5-46.5mm 40-120kn 10kv Overhead Insulated Conductor Fittings Bolt Type Tension Clamp

Popular High Voltage Fuse Products

Fuse Link, Type K - 3 AMP - K

Pig Leather Gloves

Cgl Angle Brace

11kv 8A Expulsion Fuse Link

400A HRC Fuse

Latex Gloves, 3/4 Wave Stripspolyester Linerorange 7-11

Popular Outdoor Drop out Fuse Products

RW12 15/27kv 100/200A Outdoor High Voltage Drop Fuse Switch for Transmission Line Branch and Transformer Protection

Hrw 12/35kv Outdoor High Voltage Protection AC Drop-out Fuse

Rn Series 3-40.5kv 50ka 2023 New Type Indoor Medium and High Voltage Fuses Made in China

Xrnm 6kv 12kv 50ka Best Selling High Voltage Current Limiting Fuses for Motor Protection British BS Standards

Xrnt 6kv 12kv 20kv 24kv 35kv 40.5kv 50ka High Voltage Current Limiting Fuses for Protection of Transformers

Bdgh Series 7.2-40.5kv 50ka Low Price High Voltage Current Limiting Fuses Link for Transformer Protection British BS Standards

Popular Yh5wz 35kv Zinc Oxide Arrester for High Voltage Power Station Products

  • No related articles
  • Tags: , , ,

    FAST AND RELIABLE SERVICE FOR YOUR PROJECT

    Contact our trained experts today to find your perfect power solution.

    ASK A QUESTION