Buried Light Box Type Combined Transformer Substation

Product introduction:

1.DBW1A family buried substation is the latest research and development, to fill the gaps for the construction of

a new city power grids box-type substation.

2.DBW1A series Buried (box) 6 ~ 10kV substation as a communication network, rated frequency 50Hz, rated

capacity of 50 ~ 630KVA transformer substation devices independent sets for urban high-rise buildings,

residential quarters, factories, mines, hotels, parks, railway and temporary facilities, indoor and outside spaces;

can save a lot of urban land, especially the small size of the low height of the ground segment, do not block the

view and affect the landscape, ideal for placing on the sidewalk or street.

Technical specification:

Rated voltage: HV: 6/10kV, LV: 0.4kV  

Capacity range: 30, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600,

2000kVA  

Frequency: 50Hz  

Phase: single-phase and 3-phase   

Vector group: Dyn11, Yyn0   

Impedance voltage: according to national standards  

Operation environment: in the basement or the cellar 

Loss: reaching national standard S11 series parameters  

Enclosure protection level: IP68  

Noise level:≤ 55dB

Waterproof consideration for basic design and fabrication

Top: ventilation holes have effective rain-proof and water-proof capabilities;

Side: carry out surface treatment for sides by waterproof concrete materials so that water can not penetrate

from sides;

Bottom: install waterproof concrete bearing base for buried transformer that is 300mm higher than the pit

bottom.

At usual time, water flowing from the ground into the pit will enter the ring channel under the base so that it will

not immerse the buried transformer.  Lay sandy cobble at the bottom of the base so that water can penetrate

into the ground more quickly. Buried type transformer can also operate when immersing in water for more

than 0.5m for a certain period of time. It can withstand floods and can effectively improve the reliability of the

power supply system. However, in order to ensure the safe and reliable operation of the transformer, it is

suggested to check the water accumulation situation in the pit after floods and long time heavy rainfall and the

rainy season. If there is too much water, pumping and cleaning should be carried out.

Buried type transformer – temperature rise control measures

The buried type transformer temperature rise control measures can be ensured by the following four

ways:Transformer low temperature rise design, control the oil temperature at around 45K, far lower than the

international regulated 60K; 

Technical parameters:

Thanks for choosing VILLE as your reliable partner and please trust both
of us will create a brilliant future!
/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1