UL Listed Type W Mining Cable

Application:

Use on AC off track equipment such as long wall miners loaders, drills, shovels, conveyors, pumps, and mobile equipment requiring grounding conductors and a ground check conductor and metallic shielding overall other industrial, mining applications.

Maximum continuous conductor temperature is 90⁰C.

Structure:

1. Conductor: 6 AWG thru 500 kcmil coated annealed copper, bunched wires, rope-lay-stranded per

ASTM B172.

2. Insulation: Ethylene propylene Rubber (EPR) insulation.

3.  Insulation Shield: A flexible coated copper/textile braid shield is applied over non-conducting overlapped           tape.

4. Ground-Check Conductor:

Annealed copper, rope-lay-stranded per ASTM B172, insulated with high-strength yellow polypropylene.

5. Grounding Conductors:

   Coated copper, rope-lay-stranded per ASTM B172.

   Two conductors in contact with the flexible copper braid shield.

6. Separator:Polyamide open braid applied overall.

7. Jacket:

    Flame retardant, thermosetting Chlorinated Polyethylene (CPE).

Standard:

ICEA S-75-381 Portable and Power Feeder Cables for use in mines and similar applications.

Meets flame test requirements and is accepted for listing by MSHA.

UL File No.:

E482608

Voltage:

2000V

Working temperature:

 in dry locations only at temperature not to exceed 90°C.

Performance:

Excellent flexibility ;

Highly ozone, sun, weather and flame resistant ;

Oil and heat resistant.

Technical data:

TYPE SHD-GC – 2000 V

/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1