Al/XLPE+ACSR 0.6/1kv Overhead ABC Cable

Overhead, outdoors or in some low voltage areas.

Aerial Bundle Cable(ABC Cable)
Is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead distribution system. It provides higher level safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost.

Standards of Aluminum, ACSR, AAC Conductor XLPE/PE ABC( aerial bundled cable )

ASTM, BS, IEC, NFC, GB, AS/NZS

Construction of Aluminum, ACSR, AAC Conductor XLPE/PE ABC( aerial bundled cable )

Conductor: Aluminum conductor, round stranded conpressed(RM).

Insulation: XLPE compound

Core identification: 1, 2 resp. 3 raised longitudinal ribs on the surface of the cores. The surface of the neutral should have at least 12 ribs for cross-sections up to 50mm2 and a minimum of 16 ribs for cores above 50mm2. In the case of five core bundles the surface of the protective core should be smooth.

Models and descriptions
Covered line wire:
JKY: Copper core PE insulated aerial cable
JKYJ: Copper core XLPE insulated aerial cable
Service drop cable:
JKLY: Aluminum core PE insulated aerial cable
JKLYJ: Aluminum core XLPE insulated aerial cable
Secondary UD cable:
JKLHY: Aluminum alloy core PE insulated aerial cable
JKLHYJ: Aluminum alloy core XLPE insulated aerial cable

Nominal Cross-sectional Areas(sqmm)

10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2