Aluminum Conductor, Aluminum Clad Steel Reinforced, ACSR for Overhead, ACSR for Telecommunication

1. Applications
ACSR have been widely used in power transmission lines with various voltage levels, because they have such good characteristics as simple structure, convenient installation and maintenance, low cost large transmission capacity. And they are also suitable for laying across rivers valleys and the places where special geographical features exist.

2. Service Performance
(1). The permissible long-time operating temperature for aerial conductor is 70º C.
(2). Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area, the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
(3). When connecting conductors, the conductor beside the connecting tube cant be prominent. Otherwise, the force on the operating conductors will be unbalanced. After connectors are install, the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
(4). Under installaion, the arc downing stress of all the conductors should be the same. With in the permissible distance of crossing buildings or dropping to the ground, the stress can be 10-15% higher than regular stress.

3. Product Performance
(1). The electrical performance of AAC and ACSR is indicated in DCΩ /km(20º C). The resistivity of the hard aluminum wire for stranded wires is not greater than 28.264 nΩ . M of international standard value.
(2). The rated tensile strength of AAC is denoted with the result of total cross-section of all aluminum conductors multiplied by min. Tensile of corresponding size specified in the standard for aluminum wire.
(3). The rated tensile strengh of ACSR is denoted with sum of all aluminum conductorstensile strength and steels tensile strength.
A. The tensile strength of all aluminum conductors is denoted with the result of all cross-sections of aluminum conductors multiplied by min. Tensile strength of corresponding size specified in the standard for aluminum wire.
B. The tensile strength of all steel wire is denoted with the result of all cross-sections of steel wires multiplied by the stress at 1% elongation of corresponding size specified in the standard for steel wire.

We can also produce the wire according to customer’s requirement

Our Advantages:
1. Short delivery and timely delivery
2. Considerate after-sales service
3. Professional manufacture for ACSR with more than 20 years experience
4. Full set of testing equipment to ensure products’ performance
5. Strict quality control process
6. We are factory and our price is competitive

ACSR/AW-Aluminum Conductor Aluminum Clad Steel Reinforced
Standard
IEC61089, BS215 part2, ASTM B232, DIN48204, BS EN50182.
ACSR/AW bare conductor meets or exceeds the following ASTM specifications:
• B230 Aluminum 1350-H19 Wire for Electrical Purposes.
• B502 Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors.
• B549 Concentric-Lay Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR-AW)
APPLICATIONS
Used as bare overhead transmission and as primary and secondary distribution cable.
It has good characteristics such as simple structure, convenient installation and maintenance, low cost for the line, large transmission capacity. It is also suitable for laying across rivers and valleys where special geographical features exist.
ACSR/AW offers strength characteristics similar to ACSR, along with slightly greater ampacity and resistance to corrosion due to aluminum-cladding of the steel core wires.
CONSTRUCTION
Aluminum 1350-H19 wires, concentrically stranded around aluminum-clad steel core.

IEC1089