3.6/6kv Single Core Copper Core XLPE Insulated Power Cable

3.6/6KV XLPE insulated power cable underground use
  (1)Production capacity:5000km/month
   (2)MOQ:1km
   (3)Delivery:5~15 officail days.
   (4)Standards:IEC,ASTM,DIN,BS; or according to customers’ requirements.

1. Specification
1)Conductors:copper
 2)Both armored and non-armored type power cables are available.
 3)Voltage rating: 0.6/1kV 3.6/6kV 6/10kV 8.7/15kV 26/35kV.
 4)PVC or XLPE sheathed.
 5)Number of cable cores: one core (Single core),two cores(Double cores),three cores,
      Four cores (Four Equal-section-area cores or three equal-section area cores and one smaller section area neutral core),
     Five cores (Five equal-area cores or three equal-section
area cores and two smaller section area neutral cores).
  6)Standards: IEC 60502.IEC, BS, DIN, ASTM, CSA, NFC, AS, GOST etc. Or other special characteristics as customers request.

2.Characteristics of Cable
 1)Max Long-time operating temperature of PVC insulated cable is 70°C,XLPE 90°C
 2)Installing temperature of cable should not be less than 0°C
 3)Max short-circuit temperature is:PVC not exceed 160°C,XLPE 250°C,Not more than5 Sec.
 4)Permitting bending radius cable: Not less than 10 D times (D:external diameter of cable)
 5)Perfect chemical stability, resistant against acids, alkali, grease and organic solvents, and flamer retardant.

3.Number of Cores & Nominal Cross-section Area

4.Installation:
1)The installation temperature should not over 20ºC, If the ambient temperature is lower than 0ºC, the cable should be preheated.
2)The bending radius of cable should not less than 8 times.
3)After installantion, the cable should with stand voltage test for 15min. 3.5kv D.C.

In air:
1) As the single core cable laying in parallel, the distance between the cable’s center is 2 times (for cables which cross section area of conductor ≤185mm2) and
90mm (for cables which cross sectional area of conductor≥240mm2)
2)Ambient temperature: 30ºC
3)Max. temperature of conductor: 70ºC
4)Rating factors of current rating for ambient temperature:

In ground:
1)When the single core cables are installed separately, the distance between the cable’s center is 2 times of the cable diameter.
2)Ambient temperature: 25ºC.
3)Max. temperature of conductor: 70ºC.
4)Soil thermour resistivity: 1.0ºC. m/w.
5)Depth: 0.7m
6)Rating factors under different ambient temp.:

5.XLPE Insulated electric cable