Aluminum Cable Type Mc

APPLICATIONS suitable for use as follows:

• Branch, feeder and service power distribution under high ambient temperatures in commercial, industrial, institutional, and multi-residential buildings
• Power, lighting, control, and signal circuits
• Fished or embedded in plaster
• Concealed or exposed installations
• Environmental air-handling spaces per NEC^©300.22(c)
• Places of Assembly per NEC®518.4 and theaters per NEC®520.5
• As aerial cable on a messenger
• Installation in cable tray and approved raceways
• Under raised floors for information technology equipement conductors and cables per NEC®645.5(D)&645.(D)(2)
• Class Div.2, Class Div.2,Class Div.1 Hazardous Locations

STANDARDS&REFERENCES

Aluminum Type MC Cable with tripele e® Aluminum Alloy Meets or exceeds the requirements of UL Standard 44,UL Standard 1569 for Type MC, ICEA S-95-658(NEMAWC70)for O-2000 V Nonshielded Cables, Federal Specification A-A59544(formerly J-C-30B),IEEE 1202(70,000BTU/hr) Vertical Cable Tray Flame Test, and the American Electrical CODE®.  Aluminum Type MC Cable with triple e® Aluminum Alloy is listed for use in UL 1,2,and 3 Hour Through -Penetration Firestop Systems.

CONSTRUCTION

Aluminum Type MC Cable is constructed with Type XHHW-2 conductors rated 90ºC wet or dry, and a bare equipment grounding conductor. The Conductors are AA-8000 series Aluminum Alloy compact stranded. A binder tape is wrapped over the conductors with interlocked aluminum tape applied over the assembly. Aluminum interlocking armor is applied over the assembly. Refer to color chart for conductor color sequence.

FEATURES

• UL Classified 1,2,and 3 Hour Through-Penetration Firestop Systems:W-J-3037,W-L-3110,W-L-3113,W-L-3117,W-L-3120,W-L-3121,W-L-3160,C-AJ-3115,C-AJ-3140,C-AJ-3142,C-AJ-3145,C-AJ-3173,C-AJ-3202,C-AJ-4065,C-AJ-4066,F-C-3038
• Cable reverse wound on reel for ease of pulling and installation.When pulling from coils,pull from inside to ensure ease of installation
• Anti-short bushings are not required for use with MC cable per the NEC® and UL

WEIGHTS,MEASUREMENTS AND PACKAGING

Conductor Size(AWG/kcmil)

Sub Assembly(inches)

Overall Nominal Diameter(inches)

yifangcable.en. Weight Per 1000(lbs)

Allowable Ampacity

(wet or dry)

75ºC

95ºC

THREE CONDUCTOR With Ground

6-6-6-6

0.57

0.78

237

50

60

4-4-4-6

0.66

0.88

298

65

75

2-2-2-6

0.78

1.00

411

90

100

1-1-1-4

0.89

1.11

496

100

115

1/0-1/0-1/0-4

0.97

1.19

578

120

135

2/0-2/0-2/0-4

1.06

1.27

678

135

150

3/0-3/0-3/0-4

1.16

1.38

833

155

175

4/0-4/0-4/0-2

1.27

1.59

1089

180

205

250-250-250-2

1.42

1.73

1275

205

230

250-250-250-3/0

1.58

1.90

1400

205

230

350-350-350-1

1.62

1.94

1653

250

280

400-400-400-1

1.72

2.04

1830

270

305

500-500-500-3/0

1.88

2.20

2177

310

350

500-500-500-2/0

1.88

2.20

2224

310

350

500-500-500-1

1.88

2.20

2257

310

350

600-600-600-1/0

2.1

2.42

2608

340

385

750-750-750-3/0

2.3

2.62

3118

385

435

750-750-750-1/0

2.3

2.62

3177

385

435

FOUR CONDUCTOR With Ground

2-2-2-2-4

0.87

1.09

508

72

80

1-1-1-1-4

0.99

1.21

619

80

92

1/0-1/0-1/0-1/0-4

1.08

1.30

727

96

108

2/0-2/0-2/0-2/0-4

1.18

1.40

858

108

120

3/0-3/0-3/0-3/0-4

1.30

1.61

1138

124

140

4/0-4/0-4/0-4/0-2

1.42

1.74

1374

144

164

250-250-250-250-3/0

1.58

1.90

1634

164

184

250-250-250-250-1

1.77

2.09

1746

164

184

350-350-350-350-1/0

1.82

2.19

2129

200

224

500-500-500-500-3/0

2.11

2.42

2877

248

280

600-600-600-600-3/0

2.34

2.66

3415

272

308

750-750-750-750-3/0

2.57

2.89

4089

308

348

750-750-750-750-750

2.89

3.20

4596

308

348

750-750-750-750-900

2.89

3.21

4837

308

348