M16*`1800mm Stay Rod for ADSS/Opgw Cable

Features:
OPGW double suspension sets are designed to reduce static stress ate the support point of OPGW cable,as well as ensure that the cable is cushionedvagainst the dynamic stress of Aeolian vibration.The combination of the reinforcing amour rods and dead-end amour rods provide against cable bending stress,there’s no other stress concentration,so that the fiber optic doesn’t produce extra loss in the cable.The grip strength of the clamp is bigger than 10%-20% of the rated tensile strength. 
 
Except for all functions of suspension clamp,the double suspension clamp can be used for long span(800-1300m),high fall and where line angle can be enlarged to 60°
 
Application:
Long span,high fall and where line angle can be enlarged to 60°.
 
Standard Configuration:
1.U-7 Anchor shackle
2.Yoke plate
3.ZH-7 Eye chain link
4.AGS clamp Aluminum  housing
5.Rubber insert
6.Dead end amour rods 
7.Reinforcing rods
8.Parallel groove clamp
9.Grounding wire Aluminum
10.Other link fittings are customized
Related Products: 

Technical data sheet:
Breaking force:70KN,100KN,120KN,160KN
Recommended span length:800m-1300m

Remarks:The double suspension clamps are sold as an assembly,including a unitof reinforcing rods,a unit of dead-end amour rod,a unit of reinforcing rods,two housing,two rubber insert,two eye chain link,a unit of Yoke plate,two anchor shackle,one parallel groove clamp,one grounding wire.
Certificates: