3X1/0AWG+4AWG Epr Insulated CPE Sheathed Type SHD-GC Mining Cable

1.Application:
These cables are designed for connections between units of mine distribution systems, suitable forinstalled in duct, conduit or open air and for direct burial in wet and dry locations.
2.Conductor
4/0 AWG Coated annealed copper brunched wires, rope lay stranded per ASTM B172
Extruded Strand Shield (ESS)
Extruded thermosetting semi conducting stress control layer over conductor
3.Insulation
Ethylene Propylene Rubber (EPR) insulation
4.Insulation Shield
Extruded conducting layer covered by a conducting tape and a flexible coated copper textile braid shield overall
5.Ground Check Conductor
One annealed copper rope lay stranded per ASTM B172, insulated with high strength polypropylene.
6.Grounding Conductors
Two coated copper rope lay stranded per ASTM B172, in contact with the flexible copper braid shield
7.Jacket
Reinforced, two layers, extra heavy duty, lead cured Chlorinated Polyethylene (CPE)
8. Detailed Standard
ICEA S-75-381/NEMA WC 58
ASTM B-8
CAN/CSA-C22.2 No.96

Conductors: Stranded annealed bare copper conductor.
Conductor Shield:Conducting layer.
Insulation:Ethylene Propylene Rubber (EPR).
Insulation Shield:Conducting layer + copper tape.
Ground Check Conductor:Copper conductor with a yellow polypropylene insulation.
Grounding Conductor:Tinned copper conductor.
Jacket: Chlorinated Polyethylene(CPE), black.