Opgw Aluminium Performed Armour Rod

Descriptions:
Armor rods are made of aluminum alloy wires, wrapped around the outside of conductor, in order to improve the wire stiffness and reducing vibration of the wire.
Specification:
Conductor armor rods are designed to protect the conductor from bending, compression, and abrasion at the support point, protection against flashover damage is also provided, which used for ACSR, AAC, AAAC and ACAR conductors, as well as steel ground wire. All rod sets are manufactured with right-hand lay as standard. It has to be mentioned in the contract if left-hand lay is required.
Usage:
The damaged dimension not more than 7% .Wrap the conductor,improve the stiffness of conductor and protect the conductor,also resist -vibration.   
Structure:                                                                           

b.aluminum alloy material,it has good mechanical function and resist-corrsion.               
c. install easily and check easily.It doesn’t need professional tools,one person can finish it.
Usage Note:
1.different specification splice can’t be replaced.
2.the splice just use for one time,after afford full tension,it can’t be used again
3.The products is suitable for the trained technical person
4.before installing,it should be polished,get rid of oxide layer.Meanwhile it need to overlay the special electrical conductor grease.
5.in case clash and press hard
6.when working,in case lightning stroke.

>>——————————————————————