Porcelain Cable Termination

Porcelain Cable Termination image

Get Latest Price Request a quote

Quick Details

Product Name:

Porcelain Cable Termination

Feature:

Insulation

Condition:

New

Customized:

Customized

Certification:

ISO

Type:

Cable Termination

HS Code:

8538900000

Product Details

Product Characteristics

Material name		Full traction joint for driver ACSR-AAAC No. 1/0 AWG
Splicing standards		ANSI C119.4, ASTM D 566
Splice class		TO
Raw material of the driver		Aluminium alloy
Pre-insulated compression splice design		The tubular or cylindrical body manufactured in aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they were designed and with a stop inside, filled with inhibitor compound.
Splice fabrication		The joints must be designed with the best quality materials, allowing to fulfill its function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion.
Calibers of drivers	mm	ACSR 1/0
Diameter of the driver	mm	10.12
Sleeve length	mm	300 a 330
Central diameter of splice	mm	28 a 32
Maximum tension	dAN	1,600
Color		Yellow-yellow
The splice nozzles must present		a sealing plug that prevents the moisture entry and agents external to its interior that lead to corrosion of the same, similarly must fulfill the function of maintaining inhibitory fat within the splice during transport and storage
DN-DS certificate		Attach acceptance certificate and homologation
Identification Mark		You must submit a print on the body of the material name of the manufacturer, measure of conductor, tension, minimum pressure of the press
Packaging		The hose couplings of Pre-insulated compression should be packed in a highly resistant cardboard box in order to protect in the transport and handling of the material

The stress cone is made of imported EPDM. The insulation oil and stress cone is separated by the stress cone cap. The surface pressure of stress cone is maintained by a spring device (stress cone bracket) so that the press of interface is kept permanently during the course of running. This structure can overcome the disadvantages or defects from material aging and bad contact.
The termination bushing adopts the structure of big and small umbrella skirt structure, has good property of anti-pollution flashover.
The termination bushing adopts multi-seal to prevent leakage water and oil during running, prolong its service life.
The porcelain bushing is made of high-strength porcelain with big and small rain skirts. It has the advantages of weather resistant, good anti-tracking, electrical corrosion and drain off water property.
The composite bushing is made of epoxy glass fiber sleeve which is covered over anti-weather insulating silicone rubber skirt. It has the advantages of weather resistant, good anti-tracking, electrical corrosion, drain off water and anti-explosion property. The weight is only 20% of porcelain termination.

We are China Porcelain Cable Termination manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote