Xgu-3 Suspension Clamp for ACSR Conducto

Xgu-3 Suspension Clamp for ACSR Conducto image

Get Latest Price Request a quote

Quick Details

Product Name:

Xgu-3 Suspension Clamp for ACSR Conducto

Model NO.:

XGU-3

Type:

Link Fittings

Usage:

Line Fittings

Standard:

Technics:

Welding

Trademark:

Oeipower

Transport Package:

Carton

Specification:

copper aluminium

Origin:

China Nangyang

HS Code:

73269090

Product Details

TYPE:APG-B4
NAME:Parallel groove clamp APG-B4
Specification
Al 25-240mm² Size 62*58mm Double-bolts Bolt M10*60 Weight 280g

3.6	The throat of the staple will present a diameter range	mm	26.42
3.7	Throat Suspension Clamp support must have curvature, to allow an angle of entry and exit from the driver,	º	30º
3.8	Suspension clips present a breaking load	kg	11,340
3.9	Minimum weight of zinc deposited in the hot galvanized steel	g/m²	915
3.10	Minimum weight of zinc deposited in bolts, nuts and washers	g/m²	400
3.11	Dimensions and drawings	mm	yes
3.12	ASTM standards		ASTM 123/153

Material

Connector bodies made of corrosion resistant, high strength aluminum alloy 99.5
Bolts: DIN 933, steel 8.8, dacromet; Nut: DIN934, dacromet, pressed into lower part
Pressure pad: aluminum alloy; Spring washer: DIN127, steel
Conical washer/Spring washers: Steel, DIN6796 corrosion-protected, dacromet

4.3	The body material will be alloy of aluminum, bolts, washers and nuts of the fastening system of the staple will be hot dip galvanized forged steel		yes
4.3	ACSR 556 conductor diameter. 4MCM not including the rod	mm	23.54
4.5	Breaking load	kg
4.6	The compression type anchor clips for the conductor must be supplied with a connection terminal that can be bolted		0° o 30°.
4.7	Weight of zinc deposited on steel	g/m²	915 g/m².
4.8	Zinc weight deposited on bolts, nuts and washers	g/m²	400 g/m².

4.9	Weight	kg
4.1	Dimensions and drawings		yes
4.11	ASTM standards		ASTM 123/153
4.12	Attach to the staple		Norma IEC 60471.

Stainless steel A2 bolts and nuts available according to order.

6.3	The construction material of the splice must be aluminum and aluminum alloy must contain a maximum of 0.1% copper		yes
6.4	ACSR conductor section 556.4MCM	mm²	327.93
6.5	Length	m
6.6	Breaking load	kg
6.7	Repair splices for the conductor must be preformed rods of the Armor Splice Full type Tension."		yes
6.8	Each rod that forms the joint must have a mark in its center with indelible ink		yes
6.9	Weight per unit	kg

We are China Xgu-3 Suspension Clamp for ACSR Conducto manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote