Distribution Cabinet
Distribution Cabinet image
Get Latest Price Request a quote
Quick Details
Product Details
Low Voltage MCB & RCCB
The low voltage MCCB/MCBs shall comply with the following requirements:
MCCB/MCBs shall comply fully with IEC 898, 1995 or IS 8828, 1996 or BS EN 60947-2 and the case shall be of moulded insulating material of good mechanical strength and non-tracking properties.
RCCB/MCBs shall be of manual/automatic tripping operation. The automatic type shall each incorporate a trip unit to provide overload and short circuit protection.
Each RCCB/MCB shall incorporate "Trip free" mechanism to ensure that the breaker can not be held closed in fault condition.
The operating mechanism of the RCCB/MCBs shall be hermetically sealed.
RCCB/MCBs shall give positive contact indication with operating knob clearly indicating the status of the contact inside.
MCCB/MCBs shall be of Energy limitation Class 3
The rated voltage shall be 415/240V AC
The breaking capacity shall be 6kA.
The degree of protection – IP 20
The Impulse withstand voltage- 6kV
Electrical life – 10,000 operations
House Service RCCB/MCB
Specify and attach catalog technical model proposed by the manufacturer |
|
Bimetallic Compression Terminal driver. No. 2 AWG- 2 hole |
|
º Must be made of material bimetallic terminal pads and connectors made of high conductivity copper and aluminum alloy coated with a tin layer, in order to increase its resistance to corrosion on the inside contain a structure and a compound that inhibits the galvanic couple, preventing corrosion and false contacts in the copper and aluminum joints. They have a bevel that facilitates the insertion of the driver and a full hole ensures that the connector or shoe is centered and perfectly sealed. For connections of terminals and splices up to 35 kv in aluminum cable. |
|
It should present a smooth surface , free of imperfections and defects |
|
By friction | |
ANCI C119.4, IEEE 48-1996 | |
ISO 9001 | |
The name of the manufacturer and the range of application must be engraved on the terminal | |
ACSR, AAC, AAAC, CU | |
AWG | #2 |
mm | 7.417 |
inch(mm | 2/5 (10.12) |
inch(mm | 1/2 (13) |
u | 2 |
Coffee | |
inch(mm) | 9/16 (14.22) |
inch(mm) | ¾-1 (19.05 -25.4) |
inch(mm) | 3.5 (89) |
inch(mm) | 4/5 (20) |
inch(mm) | 0.12 (3.04) |
It should be packed in a box Highly resistant cardboard identified with a label where you describe caliber # 2 AWG, manufacturer, quantity, country of origin |
The house services RCCB/MCBs shall be installed on the house distribution board to protect the meter and also the distribution system from any possible fault in the house. The supplier shall include the appropriate fixing attachments of each of the RCCB/MCBs with the house distribution boards. The RCCB/MCBs shall comply with the following requirements:
i) RCCB/MCBs shall comply fully with IEC 898, 1995 or IS 8828, 1996 or BS EN 60947-2 and the case shall be of moulded insulating material of good mechanical strength and non-tracking properties.
ii) RCCB/MCBs shall be of manual/automatic tripping operation. The automatic type shall each incorporate a trip unit to provide overload and short circuit protection.
iii) Each RCCB/MCB shall incorporate "Trip free" mechanism to ensure that the breaker can not be held closed in fault condition.
iv) The operating mechanism of the RCCB/MCBs shall be hermetically sealed.
v) RCCB/MCBs shall give positive contact indication with operating knob clearly indicating the status of the contact inside.
vi) RCCB/MCBs shall be of Energy limitation Class 3
The rated voltage shall be 415/240V AC
The breaking capacity shall be 10kA.
The degree of protection – IP 20
The Impulse withstand voltage- 6kV
Electrical life – 10,000 operations
Item No. | Name of goods | Descrption |
A | Line Man Safety Equipment | |
1 | 11000 Volt rubber Globe | DP-DLME A1 |
B | Distribution Line Maintenance equipment | |
1 | Operating Rod up to 11kv | DP-DLME B1 |
2 | Ratchet Puller -2.0 ton Capacity | DP-DLME B2 |
3 | High Voltage Super Tester (up to 36KV)with suitable stick | DP-DLME B3 |
4 | Insulation Resistance Tester suitable for 500,1000,2500,5000v | DP-DLME B4 |
5 | Earth Resistance Tester | DP-DLME B5 |
6 | Hand -held time domain Reflectomter /Fault Locater | DP-DLME B6 |
7 | Cable Length Meter Tester | DP-DLME B7 |
8 | Digital Clamp on meters | DP-DLME B8 |
C | Sub-station Testing equipment | 8 |
1 | Relay testing set with secondary current injector | DP-DLME C1 |
2 | Phase Sequence Indicator | DP-DLME C2 |
We are China Distribution Cabinet manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Box Products
Copper Braid Wire Copper Strand Wire and Braid Connector
Hot Selling Indoor Two Ports Plastic FTTH Terminal Box
High Quality Opgw Cable Joint Box
Resin Casting Waterproof Cable Junction Box
Popular Distribution-Cabinet Products
Copper Braid Wire Copper Strand Wire and Braid Connector
Popular jgtrade1 Products
Switch Disconnector Fuse Holder, 36 Kv - 100 AMP, Without Arc Chute
Flexible Clamps for Tubular Bus-Bar Type Mgs, Group a
Fuse Cutout, Drop out Fuses 33kv 200A
Insulated Grounding Clamp (Phase Classification)
5 Threads Latex Glovespolyester Linergreen 7-11
Popular Plastic Box Products
Seiko Manufacturing Craftsmanship Products Aluminum Power Construction Special Distribution Box
Copper Braid Wire Copper Strand Wire and Braid Connector
Tags: Box, Distribution-Cabinet, jgtrade1, Plastic Box