High Quality Polymer Suspension Insulator C&T Type Fxbw4-15/70

Name: High Quality Polymer Suspension Insulator C&T Type (15KV 70KN)
Model No.: FXBW4-15KV/70KN
Material: Silicon Rubber
End Type: Clevis & Tongue (we also offer whole set insulator with fitting)

Condition of Use of composite insulator/polymer insulator:
1. Ambient air temperatures within the range of -40 degree Celsius to +40 degree Celsius;
2. Altitude above sea level not exceeding 1, 000m; (If the altitude is higher than 1, 000, it needs adjust. )
3. Frequency of A. C. Power supply not exceeding 100Hz;
4. The mechanical load no more than the rated value.

Characteristics of composite insulator/polymer insulator:
-Small volume and light weight, easy to transport and install
-The superior in performance and high intensity mechanical enhance reliability of power line
-Extraordinary hydrophobic and resistance to contamination
-Long-duration resistance aging and leakage tracking.

More Details:

Advanced Equipment:

In order to control the quality and improve producing efficiency, we have bought the modern producing line instead of handwork.
Firstly, it can improve the producing capability. What’s more, can reduce the employee’s workload.

>>>Our Products Ranges:

The polymer insulator range from10KV-500KV polymer insulator, and tensile strength is from 40KN-420KN  and All the insulators have been produced by modern equipment. After strictly test by quality controller. The quality keep good and uniformity.                                               
Our polyer insulator can keep good working capability during -30ºC to +40ºC. which approved well by Thermal mechanical  performance test.

>>>Why Choose us:

Choose our products! You’ll get
1) Good quality guarantee (2 years)
2) Factory direct prices
3) On time delivery
4) Free sample
5) Professional technology support
 
Strict quality controls have been taken to ensure that you’ll get reliable products.
a. Material checks before production .
b. Random inspection during production .
c. Inspection before the shipment.

Our products fully comply with well recognized standards such as IEC, BS, ANSI.

>>>FAQ:

1. Q: Do you have a catalog? Can you send me the catalog to have a check of all your products?
A: Yes, We have product catalog. Please contact us, we’ll send our catalog by E-mail.

2 Q: I can’t find the product on your catalog, can you make this product for me?
A: Our catalog shows most of our products but not all. If you couldn’t find it, let us know the 
specification of your requirements, it usually takes 20-30 days for us to design and make 
new moulds which match your requirements.
 
3 Q: What’s your payment term?
A:  T/T,  L/C, D/P, Western Union are supported.

Looking forward to your valued inquiry!