Customized Flameproof Insulated Piercing Connector (IPC 3.1)
Customized Flameproof Insulated Piercing Connector (IPC 3.1) image
Get Latest Price Request a quote
Quick Details
Product Details
Insulation piercing connector is mainly suitable for the connection of the overhead insulation conductor, branch connection and grounding protection, It is used for the voltage which is 20KV, 10KV and 1KV and below. Applicable for Al-Cu conductor, different diameter wire connection, and equal diameter wire butt, and is suitable for the transition of copper aluminum insulation conductor link.
Modle | Conductor Range(mm2) | Bolts | |
Main | Tap | ||
IPC3.1 | 16-95 | 10-25 | M8*82.5 |
General of insulation piercing connector(lPC)
1.1 Piercing connector, simple installation, need not strip the cable coat.
1.2 Moment nut, piercing pressure is constant, keep good electrìc connection and make no damage to lead
1.3 Self-seam frame,wetproof, waterproof,and anti-corrosion, extend the using life of insulated lead and connector
1.4 Adopted special connectìng tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al
1.5 Small electric connecting resistance, connecting resistance less than 1.1 tìmes of the resistance of branch conductor wìth the same length
1.6 Special insulated case body, resistance to illuminatìon and environmental aging, the insulation strength can up to 12KV
1. 7 Arc surface design,apply to connection with the same(different) diameter, wide connection scope(0.75mm2-400mm2)
(Performance testing)
2.1 Mechanical performance:the grip force of the wire clamp is 1/10 bigger than the break force of the lead. It comply with GB2314-1997
2.2 Temperature rise performance: under the conditìon of big current, the temperature rise of connector is less than that of connection lead.
2.3 Heat circle performance:confirms to GB/T2317.3-2000,the beat circle trial standard for electric fitting.
2.4 Waterproof insulatìon performance:confirms to the relevant requirements in Part 2 of GB/TI3140.4-1998,
2.5 Resistance to corrosion performance: under the conditìon of SO, and salt fog, it can do three tìmes of fourteen days circle testìng.
2.6 Environmental aging performance:under the circumstance of ultraviolet, radiation, dry and moist, expose if with change of temperature and beat impulse for six weeks.
2.7 Fire-proof performance: insulation material of the connector withstands glowing filament test. Confirm to the requirements in Chapter4-1 0 of GBrr5169.4
We are China Customized Flameproof Insulated Piercing Connector (IPC 3.1) manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular cnsmico Products
Cable Lugs Copper Terminal Connector Clamp Lug
Aerial Electrical Fittings Insulation Dead End Clamps
Smico Hm-RJ45-F Hm Modular Heavy Load Connector 8pin RJ45 Connector
Double 16pin Female Male Inserts Heavy Duty Connector (HA-032)
Al Tap-off Clamp Bolted Type Pg Clamp
10mm Metal Pneumatic Contact with Shut off Heavy Duty Connector 09140006460
Popular Connector Products
ADSS Cable Accessories Cable Short Span Wedge Type Tension Clamp
Copper Connectors, Copper Busbar
Aerial Electrical Fittings Cable Clamp Insulation Insulation Piercing Connectors
Dtl Connector Copper Aluminum Connecting Terminal Lug (DTL-16)
Changyuan Hardware Accessory Plate Sag Adjuster Yoke Plate Galvanized Steel Yoke Plates
Popular Insulated Piercing Connector Products
Low Voltage Insulation Piercing Connector / Insulation Piercing Clamps (IPC)
ABC Cable Insulation Piercing Connector Insulation Piercing Clamps (35-150, 35-150 mm2, JMA-2)
ABC Cable Insulation Piercing Connector (IPC) (50-150, 50-150 mm2, JMA4-150)
Insulation Piercing Connector/Wire Connector (Jma Series) (120-240, 16-120, JMA6)
ABC Cable Insulation Piercing Connector Insulation Piercing Clamps (10-95/4-35(50)mm2, JMA2-95)
Popular Insulation Piercing Connector Products
Ipc Ttd-281f Insulation Piercing, Piercing Connector,
ABC Cable Insulation Piercing Connector/ Insulation Piercing Clamps (35-70, 6-35 mm2, JMA1)
ABC Cable Insulation Piercing Connector/Piercing Clamps (50-185, 50-150 mm2, JMA185)
Jma185 Low Voltage Electric Ipc Insulation Piercing Tap Connector
Smep 16-95 mm2 Insulated Piercing Connector/ABC Cable Clamp/Ipc
Insulation Piercing Connectors for Pole Line Wire Piercing Clamp
Tags: cnsmico, Connector, Insulated Piercing Connector, Insulation Piercing Connector