Aluminum Alloy Conductor Reinforced Copper Welding Electric Cable

Specific property for using
1.The permissible long-time operating temperature for aerial conductor is 70 C 
2.For long-span application in harsh environment such as heavy icing , the biggest stress of the cable at the lowest point on the span curve shall not exceed 60% of its breaking load.
3.When connecting conductors , the conductor near the connecting tube can’t be prominent. Otherwise , the force on the operating conductors will be unbalanced after connectors are pressed . The connecting tube should be plated by moistureproof paint in order to avoid corrosion.
4.In order to meet conductor-to-earth or conductor-to-building distance requirement during installation , the conductor stress can be 10%~15% higher than its permissible normal tension .

DESCRIPTION
1.Good conductiveity:The conductivity is the same as pure copper wire when the frequency is higher than 5MHZ.
2.Save copper resource , reduce the produce cost : The CCA’s density is 37~40 percent of the purecopper wire , and the length is 2.5 times of pure copper wire with the same weight .

STANDARDS
Construction as per ASTM , IEC , BS , DIN , CSA , NFC ,and so on.

APPLICATION

It can be widely used in CATV Coaxial cable , RF cable , LAN cable , Computer cable and Power cable , Magnet wire , and power transmition etc . The CCA we can produce is 0.04~5.15mm , and we also can produce as customer’s requirements .