Ball Eyes Perpendicular Type
Ball Eyes Perpendicular Type image
Get Latest Price Request a quote
Quick Details
Product Details
Color Code and Length: Assist in identification of conductor size.
Identification Tape: Shows manufacturer catalog number, nominal sizes.
CROSS ARM CLEVIS
Cross Arm type Clevises are used on
Nut conventional eye bolt 5/8 " | |
Steel | |
It must be built in one piece | |
Must be galvanized in hot dip, presenting a smooth surface, free of defects | |
ASTM A-153 | |
ISO-9001 or recent | |
pulg(mm) | 5/8(15.87) |
pulg(mm) | 1 3/8(34.92) |
pulg(mm) | ½(12.7) |
pulg(mm) | 1-1/2(38.1) |
pulg(mm) | 1 – 3/4(9.45) |
pulg(mm) | 2- 1/2(63.5) |
pulg(mm) | 3(76.2) |
kG(lbs) | 5,670(12600) |
lbs | 0.78 |
Tension Clamp For Aluminium Conductor
TECHNICAL SPECIFICATION
1. SCOPE
This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2. STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
Overhead Power Lines
BS 729 – Hot dip Galvanised
3. ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4. DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5. SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a. 50mm2 Alu. Conductor
b. 100 – 150mm2 Alu. Conductor
6. MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7. INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a. A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729
Recommended for You
Not exactly what you want?
Post Sourcing Request
Hot Searches
Electric Power Equipment
Power Line
Electric Power Supply
Electric Power Cable
Electric Power Tool
We are China Ball Eyes Perpendicular Type manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Chain shackle Products
D-Iron Bracket Galvanised Complete with Bolt and Nut
Single Polecircuitbreaker (63A) Suitable Forpolemountedsplitmeters
Spindle (pin) 33kv 200kg M20X200
Popular Cross Arm Clevis Products
Guy-Grip Dead-End Clamp for Gsw
Popular jgtrade1 Products
Fuse Cutout, Drop out Fuses 24kv 300A
Standard High Voltage Cutout Distribution
Interlock Liner Half Dipped Blue Nitrile
D Fuses High Voltage Drop Cut-out
with-Button Wire. New with-Trip Fuse Wire, High-Voltage Condenser's Pecial Fuse Wire
PVC Glovessmooth Finish Black 30cm
Popular Oval Eye Nut Products
Used for Deadending with Suspension or Strain Insulaotr 5/8'' Oval Eye Nut
Guy Attachment Electric Power Fittings
Suspension Clamps (With Clevis)
Tags: Chain shackle, Cross Arm Clevis, jgtrade1, Oval Eye Nut