AWG 6 4 2 1/0 2/0 Triplex Wire Patella Osyter Clam Murex Nassa

CONSTRUCTION:

1. Conductor: Conductors are stranded, compressed 1350-H16/H26 (3/4 Hard) aluminum

2. Insulation: Cross Linked Polyethylene (XLPE)

3. Neutral: Cross Linked Polyethylene (XLPE) with three Yellow Extruded Stripes (YES)

 APPLICATIONS AND FEATURES:

Conductors are stranded, compressed 1350-H16/H26 (3/4 Hard) aluminum, insulated with cross-linked polyethylene. Neutrals are identified by three yellow extruded stripes. Cables with "YES" neutrals have sequential footage markers. Conductors are durably surface printed for identification. One-phase conductor and one neutral conductor are cabled together to produce the duplex cable configuration. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions.

SPECIFICATIONS:

• ASTM B231 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors

• ASTM B609 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

• ASTM B901 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction. (The number of strands for both phase and neutral may differ)

• ICEA S-105-692 Standard For 600 Volt Single Layer Thermoset Insulated Utility Underground Distribution Cables