Bus Drop Cable for Wet Locations Moisture Resistant

General summarize :

Bus Drop Cable is intended for use in indoor or outdoor applications for connection of stationary or
portable equipment to facilitate relocation of equipment

Standard:

ASTM-B,B-3

UL standard 83 for THHN/THWN-2

UL Standard 509

RoHS environmental conductive requirement

Product charactors:

Insulated Power Conductors
Bare, annealed copper per ASTM B-3 Compressed stranded per UL-83

Insulation
Color coded Thermoplastic Insulation/Nylon jacketed per UL-83

Uninsulated Grounding Conductors 

Bare, annealed copper per ASTM B-3 Concentric stranded per ASTM B-8/UL-83(compressed)

Cabling
Three power conductors and three grounding conductors (one per interstice) are assembled round with fillers as needed. A separator is applied over the assembly.

Jacket

(Sunlight resistant 720 hours) Polyvinyl chloride (PVC) Light GrayUL-62

Color Coding
Black, White, and Red
Cable Identification

Specifications:

Bus Drop Cable is constructed using sizes 14 AWG through 2 AWG annealed stranded bare copper per
ASTM B-8 or B-174, as applicable. The conductors are insulated , PVC insulation with a clear nylon jacket and are colored black, white, and red. The conductors and ground wires along with paper or polypropylene fillers are cabled for flexibility then wrapped with a mylar separator to aid strippability. The cable is covered with a gray PVC jacket. Cable is rated for indoor and outdoor use in wet or dry locations.