3.6/6kv Mv 3 Core 3c120mm2 XLPE Swa Galvanized Steel Wire Armoured Power Cable 3 Core 70mm2 11kv XLPE Swa Armoured Cable

Standard 

The cable is manufactured according to IEC 60502.2, IEC 60502.1, AS/NZS 1429.1, AS/NZS 5000.1, BS 6622/7835, BS 5467, BS 6746, BS 6346, VDE 0276, ASTM, ABNT etc. It is suitable to be installed in the power line with rated voltage from (U0/U)0.6/1kV to 19/33kV for power transmission.

Application 

The electric cable is applied to transmit and distribute power in power transmission and distribution system of 1kV~35kV or lower. It is widely adopted in the fields including power, construction, industry, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power  cable and in partial re-place of PVC insulation or XLPE power cable.

Special features which we can offer for LV and MV cables:

* Watertight construction (both radial and longitudinal).
* Resistant to heavy vibration.
* Available in long delivery lengths to reduce number of joints.
* Corrosion-free screen area.
* Copper or aluminum conductor up to 800mm².
* Different options for outer PE jackets (LDPE, MDPE & HDPE).
* Different options for PVC, LSF, LSZH & FRPVC, being anti-termite or UV resistant as per 

   BS 7835, IEC 60332 etc.
* Strippable insulation screen.

* Increased armour conductivity by insertion of hard drawn copper wires in armour.

The maximum rated temperature of XLPE Power Cable

XLPE insulated,the maximum operating temperature of conductor shall exceed 90ºCwhen the cable is used for long not period. The temperature of conductor shall not exceed 250ºC at short circuit for 5 seconds.

PVC insulated,the maximum operating temperature of conductor shall exceed 90ºC or 70 ºC  when the cable is used for long not period. PVC insulated the temperature of conductor shall not exceed 160ºC at short circuit for 5 seconds.

Installation requirement of XLPE Power Cable

The installation of cable is not limited by the difference of elevation along the route. The ambient temperature should not be below 0ºC during installation. The permissible bending radius for cable shall be complied with the following regulations:

For single-core: R>20(D+d) +/-5%

For multi-core: R>15(D+d) +/-5%

Where:R-bending radius (mm) , D-overall diameter of the cable (mm) , d-diameter of conductor (mm).

Single core cable of using in AC circuit shall be without armour or with steel wire armour and shall not be laid in magnetic ducs.

Rated voltage, No. of core and range of sectional area

Rate Voltage(kv): 0.6/1kV  1.8/3kV    3.6/6kV    6/10kV      8.7/15kV   12/20kV  

                         18/30kV  21/35kV  

    Equivalent to : 0.6/1kV  1.9/3.3kV  3.8/6.6kV  6.35/11kV  8.7/15kV   12.7/22kV 

                         19/33kV   21/35kV

No. of core and sectional area(mm2):

1 Core 1.5-800    25-800    25-1200    25-1200    35-1200    50-1200    50-1200 

          50-1200 
2 Core 1.5-185     25-185 
3 Core 1.5-400     25-400     25-400     25-400     35-400     50-400     50-400  

          50-400 
4 Core 2.5-400     25-400 
5 Core 2.5-400     25-400

Our company

Yifang Electric group mainly specialized in wire&cables,including designment,production and sale.

Products are mainly covering low,medium,high voltage(1KV to 220KV) XLPE Insulated power cable,PVC insulated power cable,ABC cable,building cable control cable,rubber cable welding cable Etc.

Our XLPE cable can be manufactured according to the company’s specification which is equivalent to IEC 60502,IEC60332,IEC60754. Some indexes are superior to above international standard.

Our certificate

FAQ
1.Q:Are you a factory or trading company? 
 A: Manufacturing base in Henan ,China, with more than 500 workers.

2.Q:How can I visit there? 
 A: Sure,If you need,we will arrange the driver to pick you up. 

3.Q:How can I get some samples? 
 A: Contact me on below,Determin sample and address for shipping.  

4.Q:Have you ever supplied cables to our country? 
 A: Yifang Cables have been sold to over 100 countries and regions in the world. can you contact me for details.

5.Q:What is your MOQ? 
A: MOQ Normally 500 meters for big diameter cables.Please contact me for detail info if you have specific cable requirement. 

6. Q:When can I get the price? 
A: Usually quote within 6 hours after we get your inquiry. 

7.Q:How long is your delivery time?
 A: According to your order’s quantity.Usually our lead time is 3 – 20 working days.