Cu/XLPE/Swa/PVC Power Cable

1. Standard of XLPE Cable:
According to GB12706( Equal to IEC60502)Also can do by standard of ASTM, BS, DIN and AS/NZS or other standards as request.

2. Rated Voltage of XLPE Cable:
6/10KV; 8.7/15KV; 12/20KV; 18/20KV; 21/35KV; 6/35KV

3. Construction of XLPE Cable:
Conductor: Copper or Aluminum
Insulation: XLPE
Inner sheath: PVC or PE
Armoured: Galvanized steel tape, Galvanized steel wire
Outer Sheath: PVC or PE
NO. Of cable cross: 1 core(Single core), 2cores(Double cores), 3cores, 4cores(4 equal-section-area cores OR 3 equal-section-area+1 small section area neutral core), 5cores(5 3 equal-section-area cores+2 small area neutral cores OR 4 equal-section-area +1 small area neutral cores). We provide armored type and non-armored type for the cables stated above.
Also can do according to the customer’s request.

4. Characters of XLPE Cable:
A. Max Long-time operating temperature of XLPE insulated cable is 90° C
B. Installing temperature of cable should not be less than 0° C
C. Max short-circuit temperature is not exceed 250° C, Not more than5 Sec.
D. Unable be laid without the limit of fall with enough mechanical pull, Single core cable can not be laid in iron tube or fixed by circled iron tools around cables

FAQ

1. How many years has Henan Jiapu Cable Group been in production?

Founded in October 1998 by Mr. Gu, our facility has three separate manufacturing workshops within its 100,000-sq.-ft. building. In 2012, we operates in a new 666,000 sq. foot state-of-the-art facility in Xiaodian Industry Park.,Xinxiang, Henan ,China

2. What kinds of products does Jiapu Cable manufacture?

1)Bare Conductor ,such as AAC,AAAC,ACSR,ACAR,AACSR,ACSR/AW and so on;

2)Aerial Bundled Cable (1kV-35kV ),such as Duplex,Triplex,Quadruplex Drop Wires and so on;

3)PVC Insulated (Flexible ) Wire ;

4) PVC Insulated and Sheathed (Armoured) Power Cable;

5)Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable;

6)Welding Cable, Control Cable, Concentric Cable, Rubber Sheathed Cable and so on;

3. What kind of certifications do you have?

SABS, CE, ISO9001-2000, SGS

4.Which markets do you involve mainly in?

Our products have been exported mainly to Africa, Middle East, South-east Asia, South America,Central America,North America, Europe ,Australia, etc.

5. Which standards do you comply with when you produce the electrical wires and cables ?

We are able to produce electrical wires and cables based on GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS, CSA, etc. Meanwhile, we can design and manufacture the cables according to the samples and technical specification the customer supply.

6. What is the min.order quantity ?

It depends on the type and size of electrical wires and cables. For some small electrical wires, 100 meters can be accepted .But for the power cables with medium or high voltage, that should comply with the property of installed equipments. Anyhow,we will try our best to solve the problem and meet with the requirement If you have special request.

7. What is the production capacity per week or per month ?

For the bare conductor, we can finish 3000 tons within one month. For power cables, that depends on the type and size. The total output value per month is approx. USD3,000,000.00 for insulated aluminum cables and that is approx. USD8,000,000.00 for insulated copper cables.

8. Do you supply the customers with installation service in foreign country ?

We don’t have professional installation teams in foreign country.But if that is necessary, we will recommend our partners to cooperate with you

Specification: