24kv 100A Composite Drop out Fuse Cutout with Silver Tinned Contact

24kv 100A Composite Drop out Fuse Cutout with Silver Tinned Contact image

Get Latest Price Request a quote

Basic Info.

Model NO.

HRW-24/100

Form of Installation

Insurance Tube Holder

Environmental Protection

Environmental Protection Fuse Holder

Execution Standard

National Standard

Fusing Speed

Brand

L&R

Rated Current

100A

Rated Voltafe

15kv

Weight

6.5kg

Creepage Distance

320mm

Rated Break Current

8000A

Rated Current of Cutout Fuse

200A

Transport Package

Carton

Specification

see below dimension

Trademark

L&R

Origin

China

HS Code

8535100000

Production Capacity

50000/Day

Product Description

Zc1-HZC1 11kv drop out fuse cutout/cutout fuse/drop out fuse ability to open the fault current can be
8kA/12kV,12.5kA/12kV and 16kA/12kV(most can achieve 4 times)
Introduction:
Dropout Fuse Cutout is a kind of outdoor used high voltage
protective device. To be connected with incoming feeder
of distribution transformer or distribution line it mainly
protect transformer or lines from short circuit and overload,
and on/off loading current.
Dropout Fuse Cutout is composed of insulator supports and
fuse tube, static contacts is fixed on two sides of insulator
support and moving contact is installed on two ends of fuse
tube. Fuse tube is composed of inside extinguishing tube,
outer phenolic compound paper tube or epoxy glass tube.
Load switching fuse cutout provides enforced elastic
auxiliary contacts and arc-extinguishing enclosure for
switching on/off loading current. At normally working via
fuse link tightened the fuse tube is fixed to form up of close
position. In case system occur faults, fault current result in
fuse melt immediately and take place electric arc, which
let arc-extinguishing tube being heated and explode a lot
of gas. This will produce high pressure and blow off the arc
along with tube.
After fuse link melt moving contact has no tightened
strength again, mechanism is locked and fuse tube dropout.
Cutout now is in open position.
When it needs to switch off during cut out loading. Operator
shall via insulating operating bar pull the moving contact,
at its beginning main contact and auxiliary static contact is
contacted still.
Whiling pulling the auxiliary contact is separated between
auxiliary contacts there occur electric arc and the arc will
be lengthened in arc-extinguishing enclosure gap and
meanwhile arc-extinguishing explode gas to blow off the arc during current passing zero.

Material: Silicone rubber or Porcelain

Type model	Rated voltage (kV)	Rated current (A)	Breaking current (kA)	Impulse voltage BIL (kV)	Power frequency withstand voltage (kV)	Leakage distance (mm/kV)	Material
(H)RW-11/100	11	100	6.3	100	35	25-31	Polymer/Porcelain
(H)RW-11/200	11	200	10.0	100	35	25-31	Polymer/Porcelain
(H)RW-11/400	11	400	12.5	100	35	25-31	Polymer/Porcelain
(H)RW-12/100	12	100	6.3	110	40	25-31	Polymer/Porcelain
(H)RW-12/200	12	200	10.0	110	40	25-31	Polymer/Porcelain
(H)RW-15/100	15	100	6.3	125	45	25-31	Polymer/Porcelain
(H)RW-15/200	15	200	10.0	125	45	25-31	Polymer/Porcelain
(H)RW-18/100	18	100	6.3	130	50	25-31	Polymer/Porcelain
(H)RW-18/200	18	200	10.0	130	50	25-31	Polymer/Porcelain
(H)RW-21/100	21	100	6.3	140	58	25-31	Polymer/Porcelain
(H)RW-21/200	21	200	10.0	140	58	25-31	Polymer/Porcelain
(H)RW-24/100	24	100	6.3	150	65	25-31	Polymer/Porcelain
(H)RW-24/200	24	200	10.0	150	65	25-31	Polymer/Porcelain
(H)RW-27/100	27	100	6.3	160	68	25-31	Polymer/Porcelain
(H)RW-27/200	27	200	10.0	160	68	25-31	Polymer/Porcelain
(H)RW-30/100	30	100	6.3	170	70	25-31	Polymer/Porcelain
(H)RW-30/200	30	200	10.0	170	70	25-31	Polymer/Porcelain
(H)RW-33/100	33	100	6.3	175	75	25-31	Polymer/Porcelain
(H)RW-33/200	33	200	10.0	175	75	25-31	Polymer/Porcelain
(H)RW-33/400	33	400	12.5	175	75	25-31	Polymer/Porcelain
(H)RW-36/100	36	100	6.3	180	80	25-31	Polymer/Porcelain
(H)RW-36/200	36	200	10.0	180	80	25-31	Polymer/Porcelain

Our product are fully comply with the standard such as IEC, BS, ANSI and other well recognized standard and requirement.
We strongly believe in the importance of maintaining high quality in all our products. We have brought in advanced quality tests as to ensure strict quality control before delivery. We have adopted advanced date management system to monitor and to supervise all individual process through our whole production lines of the product with traceabledata in details and recorded at all level.

Our customers
Our products have being in service on electrical networks of more than more than 20 countries from 2005.
We had supplied our products and services to the below customers:CHINESE STATE GRID,KENYA KPLC & REA,UGANDA REA & UMEME,TANZANIA TANESCO,GHANA ECG, SOUTH AFRICA ESKOM & ARB,NIGERIAL NEPA,COTE D’IVOIRE CIENERGIES,JORDAN EDCO & NEPCO, OMAN PDO, VIETNAM EVN,MEXICO IUSA,ECUADOR CELEC,NEPAL NEA,……….
Here, We look forward to your joining.

We are China 24kv 100A Composite Drop out Fuse Cutout with Silver Tinned Contact manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote