ABC Cable Overhead Cable Service Drop

Standard; National Standard IEC and ICEA

Rated Voltage; 0.6/1KV 11KV and 33KV

Construction; Phase conductor; Aluminum stranded;

Neutral conductor; Aluminum stranded; AAC; Aluminum alloy stranded; AAAC; Aluminum conductor steel reinforced; ACSR;

Insulation; XLPE or PE

Application; The cables are designed for aerial power lines and room-entrance wires with voltage up to and including 1kv; ;
Uesd for overhead service application such as street linghting, outdoor lighting and temporary service for cunstruction; Which improves the safety and reliance of electrified wire netting;

1 Type; Duplex Service Drop; Triplex Service Drop; Quadruplex Service Drop

A Duplex Service Drop
Applications; To supply 120 volt aerial service for temporary service at construction sites; Outdoor or street lighting; For service at 600 volts or lower at a conductor temperature of 75 maximum;

B Triplex Service Drop
Applications; To supply power from the ulilitys lines to the consumer; Weatherhead; For service at 600 volts or less; Phase to phase; At a conductor temperature of 75 maximum for PE insulation or 90 maximum for XLPE insulation;

C Quadruplex Service Drop
Applications; Used to supply 3 phase power; Usually from a pole-mounted transformer to the user; S servic head where connection to the service entance cable is made&; To be used at voltages of 600 volts or less phase to phase and at conductor temperature not to exceed 75 for PE insulated conductors or 90 for XLPE insulated conductors;

2 Construction
A Phase Conductor construction; The phase conductor is aluminum alloy 1350-H19 hard-drawn, Compressed concentric-lay-stranded.

B Neutral Conductor Construction
Cable assemblies are available with the following neutral conductors:
Aluminum conductors, Coated-steel reinforced ( ACSR) , Concentric-lay-stranded
Aluminum alloy 1350-H19 hard-drawn, Concentric-lay-stranded
Aluminum alloy 6201-T81, Concentric-lay-stranded

C Insulation Material
The standard insulation on the phase conductor is black low-density crosslinked polyethylene; XLPE;
Alternatively; Black linear low-density polyethylene; LDPE; Insulation with a 75° C temperature rating is available upon request.