Al Conductor XLPE Insulated Cable Al/XLPE/PVC Cable

PRODUCTS & STANDARDS
We can produce more than 2, 000 types of cables and wires, such as

Bare Conductor: AAC, AAAC, ACSR, ACSR/AW, ACAR, ACSS, ACSS/AW, Aluminum Clad Steel Wire/Strand, Bare Copper Conductors, Copper Clad Steel Wire/Strand, Copper Clad Aluminum(CCA), Galvanized Steel Wire/Strand, etc.

Overhead Insulated Cable: Covered Line Single Core Cable and Aerial Bundled Cable (ABC). ABC includes Duplex, Triplex, Quadruplex and more Cores Service Drop Cable.

PVC Insulated Wire up to 450/750V
PVC or XLPE Insulated Power Cable from 1kV to 36kV
Control Cable
Welding Cable
Rubber Cable

We can produce cables according to the standards of IEC, ASTM, EN (BS, DIN, NF, etc. ), AS/NZ and meet customers’ special requirements.

ACHIEVEMENTS & COMMITMENT
Our cable has been exported to South-East Asia, South Asia, Middle-East, Europe, North and South America, Africa, Australia & New Zealand and so on. Zhengzhou Jinyuan Wire and Cable Co., Ltd. ‘s commitment is to be recognized as a zero-defect world class manufacturer in cable industry through continuous improvement of our quality, processes, and products, and by our determination to exceed our clients’ expectations.

8.7/15kV AL/XLPE/PVC(or PE) Power Cable

1. Description
Construction: Compacted stranded circular aluminum conductor, extruded semi-conducting compound as conductor shield, cross-linked polyethylene (XLPE) insulation, semi-conducting compound as insulation shield, copper tape or combination of copper wire and tape as metallic screen, three cores assembled together with non-hygroscopic polypropylene filler, wrapped with binder tape, PVC or PE outer sheath.

2. Operating Characteristics
Rated voltage U0/U(Um): 8.7/15(17.5)kV

U0 is the rated power frequency voltage between conductor and earth or metallic screen for which the cable is designed; U is the rated power frequency voltage between conductors for which the cable is designed;
Um is the maximum value of the "highest system voltage" for which the equipment may be used.

Max. Permissible continuous operating temperature of conductor: 90 ° C

Max. Temperature of conductor during short-circuit (5s max. Duration) shall not exceed: 250 ° C The ambient temperature under installation should not be lower than: 0 ° C
The bending radius of cable is recommended as following:

For single core cable: Not less than 20 times of the diameter of cable

For three core cable: Not less than 15 times of the diameter of cable

3. Application

The cable is used for fixed installations such as electric power distribution networks or industrial installations, which is laid indoors, outdoors, in tunnel or in cable trench, unable to bear external mechanical force.
Single core cable in magnetic duct is not permissible.

4. Manufacturing Standards
IEC 60502-2 and Chinese National Standard GB/T 12706-2008

We can produce above cables according to popular international standards such as ASTM, BS, DIN, NF &AS/NZ also.

8.7/15KV, three cores, ALUMINUM conductor, XLPE insulated, and PVC or PE sheath cable CABLE CONSTRUCTION: 8.7/15KV
AL/XLPE/PVC or PE