Al/PVC/Swa/PVC, 0.6/1 Kv, Steel Wire Armored Power Cable (IEC 60502-1)

CONSTRUCTION
Conductor: Stranded circular (rm) or sector shaped (sm) aluminum conductor, as per Class 2 of IEC 60228.
Insulation: An extruded layer of Polyvinyl chloride (PVC) insulation, rated 70 º C at normal operation to IEC 60502-1.
Bedding: An extruded layer of Polyvinyl chloride (PVC).
Armouring: Single layer of round galvanized steel wires.
Outer sheath: An extruded layer of Polyvinyl chloride (PVC) sheathing compound type ST1 to IEC 60502-1.

APPLICATION
For outdoor installations in power stations, industrial plants and switchgears if mechanical protection is required or in applications where mechanical damages are expected to occur.

TECHNICAL DATA

– Nominal voltage Uo/U = 0.6/1 kV
– Power frequency test voltage 3.5 kV for 5 minutes
– Max. Admissible temperature of conductor at normal operation 70 º C
– Max. Admissible temperature of conductor at short circuit 160 º C for 5 seconds