Bare Aluminium Conductor Aluminium Alloy Reinforced Acar Conductor for Transmission Line Use

Product Description

Aluminium Conductors Aluminium Alloy Reinforced (ACAR)

1. APPLICATIONS
Used as bare overhead conductor for primary and secondary distribution. Designed utilizing a high-strength aluminum-alloy to achieve a high strength-to-weight ratio; Affords good sag characteristics. Aluminum-alloy gives 6201-T81 gives AAAC higher resistance to corrosion than ACSR.

2. SPECIFICATIONS
Huatong’s AAAC-6201-T81 bare conductor meets or exceeds the following ASTM specifications:
• B398 Aluminum-Alloy 6201-T81 Wire for Electrical Purposes.
• B399 Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors.

3. CONSTRUCTION
Aluminum-alloy 6201-T81 wires, concentrically stranded.

4. The data sheets below show part spec of IEC61089

ASTM B524 Standard ACAR
Specifications:

FAQ
1. How many years has Huatong Cable Inc. Been in production?
Founded in 1993, has made outstanding contribution to STATE GRID, CHINA SOUTH POWER GRID and the construction of domestic and foreign power market
2. What kinds of products does Huatong Cable manufacture?
1)Bare Conductor, such as AAC, AAAC, ACSR, ACAR, AACSR, ACSR/AW and so on;
2)Aerial Bundled Cable (1kV-35kV ), such as Duplex, Triplex, Quadruplex Drop Wires and so on;
3)PVC Insulated (Flexible ) Wire;
4)PVC Insulated and Sheathed (Armoured) Power Cable;
5)Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable;
6)Welding Cable, Control Cable, Concentric Cable, Rubber Sheathed Cable and so on;

3. What kind of certifications do you have?
CCC, ISO9001-2000, SGS

4. Which markets do you involve mainly in?
Our products have been exported mainly to Africa, Middle East, South-east Asia, South America, Central America, North America, Europe, Australia, etc.

5. Which standards do you comply with when you produce the electrical wires and cables?
We are able to produce electrical wires and cables based on GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS, CSA, etc. Meanwhile, we can design and manufacture the cables according to the samples and technical specification the customer supply.

6. What is the min. Order quantity?
It depends on the type and size of electrical wires and cables. For some small electrical wires, 100 meters can be accepted. But for the power cables with medium or high voltage, that should comply with the property of installed equipments. Anyhow, we will try our best to solve the problem and meet with the requirement If you have special request.

7. What is the production capacity per week or per month?
For the bare conductor, we can finish 5000 tons within one month. For power cables, that depends on the type and size.

8. Do you supply the customers with installation service in foreign country?
We don’t have professional installation teams in foreign country. But if that is necessary, we will recommend our partners to cooperate with you.