Bare Aluminium Condutor Aluminium Clad Steel Reinforced Conductor

Bare Aluminium Condutor Aluminium Clad Steel Reinforced conductor
Application
ACSR/AW AAAC ACAR AASC ACSR AAC conductor consists of a solid or stranded steel core surrounded by strands of aluminium.ACSR/AW AAAC ACAR AASC ACSR AAC Bare core is available ina range of steel strengths varying from 6% up to 40%. The higher strength conductor are used for river crossings,overhead earth wires,and installations involving extra long spans.Against any given resistance of conductor, ACSR/AW AAAC ACAR AASC ACSR AAC conductor may be manufactured to have different tensile strengths as per requirement. The principal advantage of these conductors are their high tensile strength and light weight, covering longer spans with less supports. Due to the greater diameter of an  Aluminium conductor steel reinforced  ACSR/AW AAAC ACAR AASC ACSR AAC conductor much higher corona limit can be obtained, giving a big advantage on high and extra high voltage overhead lines
Note:
1 . Weights are calculated using ASTM standard increments of stranding,
2 . Rated strengths are calculated by ASTM methods and converted to metric units after rounding,
3 . Resistance is calculated using ASTM standard increments of stranding, and metal conductivities of 61.2% IACS for EC (1350) and 8", IACS for steel,
4 . Current ratings are based on 50 Hz AC, 75  0 C conductor temperature, and 0.61 m/s (2 ft/s) wind. 0.5 coefficients of emissivity and absorption, Temperate rating -250 C ambient, 1000 watts/sq. meter sun. tropical rating – 40  0 C ambient. 1200 watts/sq meter sun.  
 
Standard:
We can supply this conductor according to different recognized standards, ACSR/AW AAAC ACAR AASC ACSR AAC conductor such as IEC61089, BS215, BS EN 50182: 2001, STM B231, CSA C49, DIN480201, JIS C3109,
customer special specification also can be satisfied.
ACSR/AW AAAC ACAR AASC ACSR AAC  conductor used for Overhead electrical distribution and transmission lines for distributing power.
(AAAC) Conductor as per ASTM-B-399-1992
(AAAC) Conductor as per BS-3242-1970
(AAAC) Conductor IS: 398-IV-1994
(ACSR) as per ASTM-B-233-1992
(AAC) as per BS-215-1-1970
(AAC) as per IS-398-1: 1976
(AAC) as per ASTM-B-231-1990
(ACSR) as per IS: 398-II: 1976 & IS: 398-V: 1992
(ACSR) BS-215-II-1970
(AACSR) as per IEC-1089-1191
AAC(All aluminum conductor) are suited for overhead power line.
 

Workshop: