Bolt Guardacabo Eye Angular 5/8 "X 12"

Bolt Guardacabo Eye Angular 5/8 "X 12" image

Get Latest Price Request a quote

Quick Details

Product Name:

Bolt Guardacabo Eye Angular 5/8 "X 12"

Model NO.:

B-09

Type:

Link Fittings

Usage:

Line Fittings

Standard:

Technics:

Welding

Trademark:

Oeipower

Transport Package:

Carton

Specification:

copper aluminium

Origin:

China Nangyang

HS Code:

73269090

Product Details

TYPE:APG-B4
NAME:Parallel groove clamp APG-B4
Specification
Al 25-240mm² Size 62*58mm Double-bolts Bolt M10*60 Weight 280g

3.6	The throat of the staple will present a diameter range	mm	26.42
3.7	Throat Suspension Clamp support must have curvature, to allow an angle of entry and exit from the driver,	º	30º
3.8	Suspension clips present a breaking load	kg	11,340
3.9	Minimum weight of zinc deposited in the hot galvanized steel	g/m²	915
3.10	Minimum weight of zinc deposited in bolts, nuts and washers	g/m²	400
3.11	Dimensions and drawings	mm	yes
3.12	ASTM standards		ASTM 123/153

Material

	Specify origin of the model proposed
	Specify code and attach technical catalog of the model proposed by the manufacturer
	Guardacabo bolt with angular eye 5/8 "x12"
	Steel, formed in one piece
	Galvanized in hot dip
	ASTM A-153, ANSI C135.4
	Each bolt must present the symbol of the manufacturer
	Bolts must be packed in a box wood to protect it in handling, storage and transport. Each box must indicate the name of the material, manufacturer and quantity

inch(mm)	5/8(15.87)
inch(mm)	12(304.8)
inch(mm)	6(152.4)
inch(mm)	11/16
inch(mm)	1-3/8(34.92)
inch(mm)	1-1/2(38.1)
inch(mm)	9/16(14.28)
lbs	1.76
lbs.	12,400

Connector bodies made of corrosion resistant, high strength aluminum alloy 99.5
Bolts: DIN 933, steel 8.8, dacromet; Nut: DIN934, dacromet, pressed into lower part
Pressure pad: aluminum alloy; Spring washer: DIN127, steel
Conical washer/Spring washers: Steel, DIN6796 corrosion-protected, dacromet

3	Catalog and manufacturer reference code		Specify code and attach technical catalog of the model proposed by the manufacturer
4	Name of the material		Pletina stanchion 1-1 / 4 "x1 / 4" x28 "
5	Material		Steel
7	Finished		Galvanized in hot dip, manufactured in one piece free of cracking, free of defects, burrs
8	Manufacturing standard		ASTM-A36, ASTM A36M,, ASTM- A123 ,ASTM A153
	Overall dimensions	inch(mm)	1 1/4 x 1/4 x 28(31.75 x 6.35 x 711.2)
9	Length	inch(mm)	28(711.2)
10	Thickness	inch(mm)	1/4(6.35)
11	Width	inch(mm)	1 1/4(31.75)
12	Dimension of holes in ends: to. Hole A (end towards crosshead)	inch(mm)	0.562(14.28)
13	Dimension of holes in ends: b. Hole B (end towards pole)	inch(mm)	0.437(11.11)
14	Weight	lbs	2.15
15	Identification mark		Each strut must present the engraved symbol of the manufacturer
16	Packaging		In a group of 25 units the struts of Plates should be tied at each end and then packed in a highly resistant cardboard box for transport, storage and handling.

4.3	The body material will be alloy of aluminum, bolts, washers and nuts of the fastening system of the staple will be hot dip galvanized forged steel		yes
4.3	ACSR 556 conductor diameter. 4MCM not including the rod	mm	23.54
4.5	Breaking load	kg
4.6	The compression type anchor clips for the conductor must be supplied with a connection terminal that can be bolted		0° o 30°.
4.7	Weight of zinc deposited on steel	g/m²	915 g/m².
4.8	Zinc weight deposited on bolts, nuts and washers	g/m²	400 g/m².

4.9	Weight	kg
4.1	Dimensions and drawings		yes
4.11	ASTM standards		ASTM 123/153
4.12	Attach to the staple		Norma IEC 60471.

Stainless steel A2 bolts and nuts available according to order.

6.3	The construction material of the splice must be aluminum and aluminum alloy must contain a maximum of 0.1% copper		yes
6.4	ACSR conductor section 556.4MCM	mm²	327.93
6.5	Length	m
6.6	Breaking load	kg
6.7	Repair splices for the conductor must be preformed rods of the Armor Splice Full type Tension."		yes
6.8	Each rod that forms the joint must have a mark in its center with indelible ink		yes
6.9	Weight per unit	kg

5	Material		Steel
6	Finished		Bolt all threads and nuts they should have smooth surfaces and free of splinters, which may affect their functionality After the galvanizing operation, a centrifugation operation will be carried out that helps to uniformize the zinc layer in all the threaded parts and eliminate excess zinc. The nuts must have been checked after hot-dip galvanizing according to ANSI / ASTM A153.
7	Norm		ASTM A153, ASTM A‐307, ANSI B18.1.2
8	Quality certificate		ISO-9001 or recent
9	Identification mark		Each bolt must present the symbol manufacturer
10	Packaging		Bolts must be packed in a box of wood to protect it in handling, storage and transport. Each box must indicate the name of the material , manufacturer and quantity
	Dimension
11	Diameter	inch(mm)	5/8 (15.87)
12	Long	inch(mm)	18(457.2)
13	Minimum resistance	kg(lb)	5,624(12,400)
14	Weight	lbs	1.96
15	accessories		Each bolt must include four (4) square nuts

We are China Bolt Guardacabo Eye Angular 5/8 "X 12" manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote