Brown Surge Protection Device Arrester
Brown Surge Protection Device Arrester image
Get Latest Price Request a quote
Quick Details
Product Details
High Voltage Substation Lightning Arresters Manufacturers of 66kV Surge Arrester
0.25kV~750kV Surge Arresters’ Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight.
2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large
in flow capacity.
3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops, the product can be applied to the complete cabinet installation, which can reduce the designing size of cabinet.
4. Products with detachment device can provide signals for quitting operation when failure occurs,
avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level in heavy pollution areas.
Surge Arresters’ Technical Parameters:
Type | Y10W5-66/176 |
Rated voltage———kV | 66 |
MCOV —————-kV | 52.8 |
Nominal Current——-kA | 10 |
Residual voltage of steep impulse—-at 5kA(kV) | 221 |
8/20μS Residual voltage of lightning impulse current kV(Peak value)—–at 5kA(kV) | 178 |
Residual voltage of switching impulse current kV (peak value)—-at 1kA (kV) | 137 |
1mA D.C reference voltage (kV) | 96 |
Line discharge level | 1 |
2mS long duration impulse current A | 400 |
4/10μS High current impulse kA | 100 |
Lightning impulse withstand kV | 325 |
Power frequency voltage withstand(dry/wet)kV | 140 |
0.1S TOV————–kV | 79.2 |
1S TOV—————-kV | 75.9 |
10S TOV—————kV | 72.6 |
1200S TOV————-kV | 66 |
Creepage distance —-mm | 2500 |
Material employed in series non-linear resistor | Zinc Oxide |
Working condition: | Environment temperature: -40–+40 degree | |||||||
altitude:<1000m | ||||||||
48HZ<Rated frequency<62HZ | ||||||||
Power frequency voltage should not be more than continuous running voltage | ||||||||
Max wind speed should be less than 35m/s | ||||||||
Earthquake intensity should be less than 7 degree | ||||||||
If used in contamination area, should be noted in advance. |
Lightning Arresters Production:
We are China Brown Surge Protection Device Arrester manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Arrester Products
5ka Yh10W 12kv Silicon Rubber Surge Arrester
Xirui 11kv 33kv 10ka Polymer Distribution Metal-Oxide Lightning Surge Arrester
500kv Outdoor Porcelain Housing Moa Lightning Conductor Arrestor Surge Protector
Porcelain Surge Arrester/Lightning Arrester
33kv Composite/Polymer Metal-Oxide Lightning Arrester Surge Arrester Without Gaps
High Voltage 33kv Porcelain Lightning Arrester
Popular hzyddq Products
Hangzhou Electrical Equipment ZnO Resistor
High Voltage Thunder Surge Diverters Manufacturers
Lightning Protectors for Power Transmission Line
New Types Diameter 35mm Height 24mm Zinc Oxide Varistor Block
Electrical Motor Operating Mechanism Cabinets for Isolator Switch
Lightning Protector SPD Lighting Arrester
Popular Surge Arrester Products
Outdoor Polymer Housed Metal Oxide Surge Arrester Without Gaps
Polymer Housed Metal Oxide Surge Arrester Without Gaps
Hy1.5W-0.5kv Zinc-Oxide Arrester
24kv-27kv High Voltage Low Price Equipment Solid and Durable Lightning Arrester
3kv Silicon Rubber Lightning Arrester with Kema Test Report
Popular Surge Protector Products
Hangzhou Fuyang ZnO Polymeric Lightning Arrester Lightning Rod
Substation 24kv 33kv 66kv Polymeric Metal-Oxide Lightning Arrester
Porcelain Arrester Lightning Arrestor Surge Protector for Transformer
Electric Substation Equipment Silicon Rubber Lighting Arresters 3kv
15kv Metal Oxide Surge Protector Arrester for Outdoor
66kv Substation Active Ceramic Porcelain Housing Lightning Surge Arrester
Tags: Arrester, hzyddq, Surge Arrester, Surge Protector