Cable Fault Tester
Cable Fault Tester image
Get Latest Price Request a quote
Basic Info.
Product Description
Cpmposites insulator,All nsulators are manufactured in accordance
to IEC 61952. Quality processes are implemented
as per ISO 9001:2000.
Item description | 11 kV Silicone composite Pin insulator requirements |
Type | Silicone composed pin insulator complete with spindle, nut and washer |
Nominal Voltage (kV) | 11 |
Highest System Voltage (kV) | 12 |
Min Nominal Creepage Distance ( mm ) |
280 |
Min failing load (kN)-Mechanical test |
10 |
Power frequency withstand voltage (one minute) Wet (kV r.m.s) |
28 |
Lightning impulse withstand voltage (kV) peak |
95 |
Material of insulation | High Temperature Vulcanised silicone rubber |
Spindle diameter (mm) | 20 mm |
Previous Type Test Certificate/results/report including ageing test at 5000 hours as per IEC 61109 |
To be submitted together with the bid. |
Routine test results | Tenderer shall provide routine test certificate with delivery of insulators |
Drawings with dimensions | Tenderer shall provide drawings showing the dimensions and tolerances of Insulators offered |
Applicable Standards for insulation and end fittings |
BS 3288 – 2 1997, IEC 61109 |
Altitude above sea level | 1400m |
Operating ambient temperature | -1 to 40 oC |
Relative humidity (Maximum) | 85% |
log embossed /printed on the insulator |
Yes |
S/N |
Detail |
Unit |
Data |
1. | Description |
33kV silicon composite pin insulator for mounting on steel cross arms as per drawing ZAM-GEN-87-E-12904 below |
|
2. | Type |
Silicon composite pin insulators complete with spindle, washer, nut and lock nut |
|
3. | Rated voltage |
kV |
33 |
4. | Highest system voltge |
kV |
36 |
ITE M | Technical Description | Unit | 11kV Silicon Rubber Line Post Insulator with bottom metal fittings complete with spindle for Horizontal Mounting. |
1 | Nominal voltage | kV | 11 |
2 | Highest system voltage | kV | 12 |
3 | Nominal specific Creepage Distance | mm/kV | 25 |
4 | Spindle dimensions | mm | As per figure 1.1 attached |
5 | Insulator dimensions | mm | As per figure 1.0 attached |
6 | Failing load (bend) P0 | kN | 10 |
7 | Failing load (Torsion) | Nm | 1.2 |
8 | Power frequency wet withstand voltage | kV(r.m .s) – one minute |
28 |
9 | Lightning impulse withstand voltage (peak) | kV | 95 |
10 | Max Nominal Diameter of Insulating Part | mm | 210 |
11 | Material of insulating part | High Temperature Vulcanised Silicon rubber |
|
12 | Material of metal parts | Hot dip galvanised steel | |
13 | Applicable Standards | BS 137 IEC 61109 ,IEC61952 ,IEC60815-3 |
|
14 | Altitude above sea level (m) | 1400 | |
15 | Operating ambient temperature (oC) | -1 to 40 | |
16 | Relative humidity (%) | 85 | |
17 | Type test certificates and results to be provided with bid | Yes/No | Yes |
18 | Routine test results/certificates to be provided on delivery | Yes/No | Yes |
19 | Drawings showing dimensions of insulators offered to be provided with bid |
Yes/No | Yes |
20 | log embossed /printed on the insulator |
Yes/N o |
Yes 173 |
Item description | 11 kV Silicone composite Pin insulator requirements |
Type | Silicone composed pin insulator complete with spindle, nut and washer |
Nominal Voltage (kV) | 11 |
Highest System Voltage (kV) | 12 |
Min Nominal Creepage Distance ( mm ) |
280 |
Min failing load (kN)-Mechanical test |
10 |
Power frequency withstand voltage (one minute) Wet (kV r.m.s) |
28 |
Lightning impulse withstand voltage (kV) peak |
95 |
Material of insulation | High Temperature Vulcanised silicone rubber |
Spindle diameter (mm) | 20 mm |
Previous Type Test Certificate/results/report including ageing test at 5000 hours as per IEC 61109 |
To be submitted together with the bid. |
Routine test results | Tenderer shall provide routine test certificate with delivery of insulators |
Drawings with dimensions | Tenderer shall provide drawings showing the dimensions and tolerances of Insulators offered |
Applicable Standards for insulation and end fittings |
BS 3288 – 2 1997, IEC 61109 |
Altitude above sea level | 1400m |
Operating ambient temperature | -1 to 40 oC |
Relative humidity (Maximum) | 85% |
log embossed /printed on the insulator |
Yes |
We are China Cable Fault Tester manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Composite Insulator Products
Wholesale Pin Type Insulator with Polymeric Housing ISO9001
IEC Standard 22kv Power Transmission Post Type Composite/ Polymer Insulator
Porcelain Insulator Type Spike 24.9 Kv, Thread 1-3 / 8 ", ANSI 56-1
Composite Suspension Insulator for Transmission Lines
24kv - 27kv Porcelain / Ceramic Dropout Fuse Cutout
Post Insulator Porcelain Insulator
Popular jgtrade1 Products
Fuse Cutout, Drop out Fuses 24kv 300A
Tam Eight Second Line Angle, Channel Tam, Tripod, Bracket The Word 7
Connector, Split-Bolt; Solderless; Cast Copper
100mm2 AAC Wasp Bare Conductor
Line Hoop, Hoop Single Hanging Line Xtended Cable Hoop
Popular Polymer Insulator Products
High Voltage Pin Polymer Insulator
Composite Pin Type Insulators for High Voltage Long Rod Suspension Insulator
Fxbw4-220/210 Composite Suspension Insulator for Transmission and Distribution
Popular Silicone Rubber Insulator Products
10kv-40.5kv Composite Polymer Post Insulators/ Support Insulators
22kv High Voltage Electrical Glazed Porcelain Pin Insulator
132kv-220kv Polymer Insulators for High Voltage Power Transmission Line
Composite Insulator 70kn - BS11 - 36kv Leakage Line 610mm
Two-Way Clamps with Three Bolts
Tags: Composite Insulator, jgtrade1, Polymer Insulator, Silicone Rubber Insulator