Cable for Electric Submersible Pump Esp Cable

1. Application: Flat submersible oil pump ESP cable is used for the power cable of ESP units which is installed on land or offshore oil Wells.

2. Flat submersible oil pump ESP cable structure:

The cables for submersible oil pump or pump unit can be produced with different types and specifications,

A. the cross-section of conductor :  42mm2 and below.

B. The well temperature :  50°C to 180°C,

C. the max. Continuous working temp. of conductor : 204°C.

D. The insulation material : PP, EPR, polyimide-F46, fluoroplastics, XLPE, etc.

E.  inner jacket :  NBR, compound of the neoprene and PVC, EPR, fluoroplastics, lead, etc.

F: The outer sheath material :  the galvanized steel tape, stainless steel tape, Lead tape etc.

All kinds of cables for submersible oil pump can be developed according to the customer’s requirements.

PP insulated and NBR sheathed, galvanized steel strip armoring, FLAT cable for submersible oil pump

1. Product description: this product is mainly used to provide power for ESP

Cable conductor continuous working temperature is not more than 96ºC (205 F)

2.Execution standard:PAI RP11S5,PAI RP11S6,IEEE1019

3. Structural drawing 

1.Conductor,2.PP insulation,3.NBR sheath,4.F4 film,

5.Nylon fabric,6.Galvanized steel strip

4. Cable structure/Size/weight

 3.  Conductor dimension and DC resistance