China Cable Dead End Strain Tension Anchor Clamp

Description:
The tension clamp is a fitting used to fix conductor to bear the conductor tensile force and hing the conductor to tension clamp set or pole to tower.It can be divided into two types according to the structure and installation condition of tension clamp.The first type can not be used as conductor,which has to bear all the tensile force of conductors and lightning conductor and the grip strength should be no less than 90% of the rated tensile resistance.The other type can be used as conductor,which should bear the whole tensile force of conductors and lightning conductor and can not be reused after removal.

Application:
The anchor clamp is apply to the termination of the bundle assembled aerial cable or the two ends between poles . The Product can be divided into four cores type, two cores type according to the cable cores.It can be installed without stripping the insulation layer and the adoption of the tight structure makes tight fixed well and get a better grip strength. 

Advantage:

1. Effectively eliminate short circuit accidents caused by small animals such as birds and animals or foreign body lap joint;
2. Prevent  electrical accident caused by condensation flaring, contamination flaring and icicle sticking snow ;
3. Prevent  corroding transformer inlet and outlet lines from acid rain salt spray and harmful chemical gas;
4. Avoid human casualties caused by pedestrian contact with exposed electrical contact;
5. Protective cover and metering device closed operation can prevent criminals from stealing electricity;
6. Buckle structure, easy to install and reusable;

>>——————————————————————

>>——————————————————————