Compression Connector Type # 2 ‐ # 2 Cu

Compression Connector Type # 2 ‐ # 2 Cu image

Get Latest Price Request a quote

Quick Details

Product Name:

Compression Connector Type # 2 &hyphen; # 2 Cu

Trademark:

OEIpower

Transport Package:

Cartons Pallets Wooden Case

Specification:

IEC IEEE

Origin:

China Nanyang

HS Code:

73269090

Product Details

B30 Compression connector Type # 2 ‐ # 2 CU
Compression connector pica grounded
for cable #2

C compression connector,
2 Cu to 2 Cu

Body: Electrolytic copper manufactured by extrusion, high resistance- With inhibitor

Copper / Copper

ANSI C 119.4, IEEE837

ISO-9001 or recent

Attach certificate of
acceptance and approval

# 2 Cu

3/4 (19)

3/4 (19.05)

3/4 (21)

Each connector should be
marked on the body with the
manufacturer symbol, catalog number, application driver ranges and die number to occupy with the hydraulic tool for installation

The connectors should be
in a package that indicates in
its exterior the range of application and prevent external agents from damaging it and causing premature oxidation

4	Material name		Aluminum compression connector Type H, 3/0 AL 3/0 ACSR
5	Raw material		Bimetallic aluminum pressure stretched, with high degree of hardness Rockwell RH30, high conductivity 1100-0
6	Rules		ANSI C119.4, UL486 A
7	Quality certificate		ISO 9001
8	Kind		H
9	Main gauges		3/0 – 4/0 ACSR
10	Caliber derivation		3/0 – 4/0 ACSR
11	Type of conductor to be connected		Aluminum, copper and ACSR
12	Slot with rust inhibitor		Yes
13	Height approx.	inch(mm)	1-1 / 2 (38.10)
	Length approx.	inch(mm)	2- 1/2 (63.5)
14	Width approx.	inch(mm)	6/7 (21.77)
15	External Comma		The external part of the connector should be placed with a bath of metallic stamp, in order to prevent environmental corrosion to moisture and air on the contact surface
16	Inhibitory compound		Each connector must present in the slot a Composite of the oxide and galvanic corrosion
17	Identification mark		Each connector should be marked with the manufacturer’s symbol, catalog number, Application driver range, number of die to occupy. When this information is not possible to present in the body of the connector, it will be printed on the connector bag except for the manufacturer’s brand and name, which must necessarily be indicated on the body of the connector
18	Packaging		Each connector should be individually packed in a high plastic bag resistance duly sealed for intempere, in order to prevent external agents from damaging it and causing premature oxidation.

kV to 38 kV grounded systems with 100 or 200 A nominal currents.

4	Connector name		Compression connector grounding pin for cable # 2
5	Raw material		Body: Electrolytic copper manufactured by extrusion, high resistance- With inhibitor
6	Driver to press		Copper
7	Driver to connect on the pike grounding	AWG	2
8	Applied standards		ANSI C 119.4, IEEE837
9	Quality certificate		ANSI C 119.4, IEEE837
10	Main admissible diameter	inch(mm)	5/8 (15.8)
11	Permissible diameter	inch(mm)	0.29 to 0.23 (7.4 to 5.8)
12	DN-DS certificate		Attach acceptance certificate and homologation
13	Identification mark		Each connector should be marked on the body with the manufacturer symbol, catalog number, application driver ranges and die number to occupy with the hydraulic tool for installation
14	Packing		The connectors should be in a package that indicates in its exterior the range of application and prevent external agents from damaging it and causing premature oxidation

Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.

The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI can be applied on all three-phase system rated at or below the maximum
operational rating of the cutout.

Product	D Bracket
Test Items	Test Content	Test Result
Test Items	Test Content	Sample 1	Sample 2	Sample 3	Sample 4	Sample 5	Remarks
Visual Inspection	Crack	√	√	√	√	√	1) Passed Mark"√" 2) Not Passed Mark"×" Test Conclusion:
	Stoma Trachoma	√	√	√	√	√
	Fins	√	√	√	√	√
	Burr	√	√	√	√	√
Galvanizing thickness	μm	√	√	√	√	√	1) Passed Mark"√" 2) Not Passed Mark"×": Test Conclusion:
Mechanical Characteristics	Mechanical Load	√	√	√	√	√	1)Passed Mark"√" 2)Not Passed Mark"×" Test Conclusion:
Inspector	Date: 02. March,2011 Approved:

We are China Compression Connector Type # 2 ‐ # 2 Cu manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote