Conductor De Aluminio AAAC AAC ACSR

1) ACSR is widely used in power transmission lines with various voltage levels, and also used in power
lines across great rivers, heavy ice area, etc. with special geographical situation.

2) ACSR Conductor has excellent advantage of high strength, large current carrying capacity and good
catenaries property as well as wear-resistance, anti-crush and corrosion-proof with simple structure,
convenient installation and maintenance, low cost for the line, large transmission capacity.

3) ACSR consists of a galvanized steel core of 1 wire , 7 wires or 19 wires surrounded by concentric layer
of aluminium wire . When a conductor with a high current carrying capacity and comparatively low strength
is required , special constructions are available with a high aluminium content.

4) Protection against Corrosion :A coating of non-oxidizing grease is normally applied to the steel cores of all
conductors, in addition to the protection offered by the galvanizing of the steel wires. One or more layers of the
aluminium wires can, if required, be supplied partially or fully greased.

2.Technical data sheet of ACSR Conductor De Aluminio 
 

^{APPLICATIONS:} 

 ^{Stranded 1350 aluminum conductors shown in this section of data are classified as follows:}

^{Class AA For bare conductors usually used in overhead lines.}

^{Class A For conductors to be covered with weather-resistant materials and for bare conductors where greater flexibility is required.}

^{Compact strand conductor for use in bare overhead applications or for use with weather-resistant coverings or insulations is also available.}

^{Classes refer to stranding and are an indication of relative conductor flexibility, AA being the least flexible, C the most flexible}

^{CONSTRUCTIONM:}

^{ALUMINUM WIRES ARE CONCENTRICALLY STRANDED}

^{Aluminum alloy 1350-H19 wires, concentrically stranded.}

^{Specifications}

^{AAC bare conductors meet or exceed the following ASTM specifications :}

^{B-230 Aluminum Wire, 1250-H19 for Electrical Purposes}

^{B-231 Aluminum Conductors, Concentric-Lay-Stranded}

^{B-400 Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors} 

^{Resistance is calculated using ASTM standard increments of stranding and metal conductivity of 52.5% IACS, AC resistance at 60Hz}

^{Current ratings are based on 75ºC conductor temperature, 25ºC ambient, 2ft/s wind, 96/watts/sq.ft sun, .05 coefficients of emissivity and absorption.}

^{AAC Standard   BS215}

^{APPLICATIONS:} 

^{Stranded 6201 aluminum alloy conductors shown in this section of data are classified as follows:}

^{Class AA For bare conductors usually used in overhead lines.}

^{Class A For conductors to be covered with weather-resistant materials and for bare conductors where greater flexibility is required.}

^{Compact strand conductor for use in bare overhead applications or for use with weather-resistant coverings or insulations is also available.}

^{Classes refer to stranding and are an indication of relative conductor flexibility, AA being the least flexible, C the most flexible}

^{CONSTRUCTIONM:}

^{ALUMINUM WIRES ARE CONCENTRICALLY STRANDED}

^{Aluminum alloy 6201 wires, concentrically stranded.}

^{Specifications}

^{AAAC bare conductors meet or exceed the following ASTM specifications :}

^{B-230 Aluminum Wire, 1250-H19 for Electrical Purposes}

^{B-231 Aluminum Conductors, Concentric-Lay-Stranded}

^{B-400 Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors}

^standards:

^{all aluminum conductor meets or exceeds the following standards:IEC61089,BS215,DIN48201,ASTMB231,BS EN50182,GB/T1179-2008}

^NOTES:

^{Resistance is calculated using ASTM standard increments of stranding and metal conductivity of 52.5% IACS, AC resistance at 60Hz}

^{Current ratings are based on 75ºC conductor temperature, 25ºC ambient, 2ft/s wind, 96/watts/sq.ft sun, .05 coefficients of emissivity and absorption.}

^{AAC Standard   BS215}

About us

^{_{People’s Cable Group was established in 2007. It is a national non-regional enterprise integrating R&D, production and sales of wires and cables, with a total area of more than 300,000 square meters and a building area of 230,000 square meters. The actual capital assets exceed 350 million U.S. dollars, and there are 630 employees, including 65 professional and technical experts. It is located at No. 13, Yongding East Road, People’s Cable Industrial Park, Gongyi Economic and Technological Development Zone, Zhengzhou City, Henan Province, China. National Highway 310 and Lianhuo Expressway run through it. The geographical position is superior and the transportation is very convenient. It is a good place for tourism and business negotiation.}}

_{People’s Cable Group Co., Ltd. specializes in the production of high, medium and low voltage series of wires and cables. The main products are PVC insulated power cables, fire-resistant cables, flame-retardant cables, control cables, rubber cables, overhead insulated cables, low-voltage coaxial cables-smokeless Halogen-free cables and shielded cables, pre-branched cables, waterproof cables, rat-proof cables, aluminum stranded wires, steel core aluminum stranded wires, railway transportation cables and cables, PVC insulated wires, buried wires, anti-aging wires, etc., more than 30 varieties, More than 3000 products of several specifications have been exported to more than ten countries and regions such as Southeast Asia, the Middle East, Africa and South America.}

Certificate

_{People’s Cable Group Co., Ltd. has strong technical force, advanced production equipment, complete testing equipment, reliable product quality and excellent after-sales service. The products are produced in strict accordance with GB, ICE, BS and other standards. It has passed ISO9001-2008 quality system certification, 14001-2004 environmental system certification, 28001-2001 occupational health and safety management system certification, national compulsory CCC certification, and obtained a national industrial product production license. Over the years, it has passed the inspections of national, provincial and municipal quality supervision departments many times. In 2010, it was recognized as a provincial-level enterprise technology research and development center by the Henan Provincial Development and Reform Commission.}

FAQ

_{Q1:When can I get the price?
We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we 
will regard your inquiry priority.
Q2.How can I get a sample to check your quality?
^{After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.}
Q3.How long can I expect to get the sample?
^{After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. 
The samples will be sent to you via express and arrive in 3~5 days.} 
Q4.What about the lead time for mass production?
^{Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.}}