Copper Conductor XLPE Insulated PVC Sheathed Armored Electric Power Cable

2.Specification
 1.) Conductors: copper or aluminum.
 2.)Both armored and non-armored type power cables are available.
 3.)Voltage rating: 0.6/1kV 3.6/6kV 6/10kV 8.7/15kV 26/35kV.
 4.)PVC or XLPE sheathed.
 5.)Number of cable cores: one core (Single core),two cores(Double cores),three cores, four cores (Four Equal-section-area cores or three equal-section area cores and one smaller section area neutral core), five cores (Five equal area cores or three equal-section-area cores and two smaller section area neutral cores).
 6.)Standards: IEC 60502.IEC, BS, DIN, ASTM, CSA, NFC, AS, GOST etc. Or other special characteristics as customers request.

3.Characteristics of Cable
 1.)Max Long-time operating temperature of PVC insulated cable is 70°C,XLPE 90°C
 2.)Installing temperature of cable should not be less than 0°C
 3.)Max short-circuit temperature is:PVC not exceed 160°C,XLPE 250°C,Not more than5 Sec.
 4.)Permitting bending radius cable: Not less than 10 D times (D:external diameter of cable)
 5.)Perfect chemical stability, resistant against acids, alkali, grease and organic solvents, and flamer retardant.

Number of Cores & Nominal Cross-section Area

4.Installation:
1. )The installation temperature should not over 20ºC, If the ambient temperature is lower than 0ºC, the cable should be preheated.
2.) The bending radius of cable should not less than 8 times.
3. )After installantion, the cable should with stand voltage test for 15min. 3.5kv D.C.
 

5.In air:
1.)  As the single core cable laying in parallel, the distance between the cable’s center is 2 times (for cables which cross section area of conductor ≤185mm2) and
90mm (for cables which cross sectional area of conductor≥240mm2)
2.) Ambient temperature: 30ºC
3.) Max. temperature of conductor: 70ºC
4.)Rating factors of current rating for ambient temperature:

6.Direct in ground:
1.)  When the single core cables are installed separately, the distance between the cable’s center is 2 times of the cable diameter.
2.)  Ambient temperature: 25ºC.
3.)  Max. temperature of conductor: 70ºC.
4.)  Soil thermour resistivity: 1.0ºC. m/w.
5. ) Depth: 0.7m
6. ) Rating factors under different ambient temp.:

7.PVC Insulation Electric Cable

XLPE Insulated electric cable

8.Our Services
We can design and manufacture many kinds of electrical wires and cables in accord with different standard,such as ASTM ,IEC,BS,DIN, CSA,NF,AS/NZS etc.;
 Our main products are as follows:
1)Bare Conductor and wire ,such as AAC,AAAC,ACSR,ACAR,AACSR,ACSR/AW , GSW, and so on;
2)Aerial Bundled Cable (1kV-35kV ),such as Duplex,Triplex,Quadruplex Drop Wires and so on;
3)PVC Insulated (Flexible ) Wire ;
4)  PVC Insulated and Sheathed (Armoured) Power Cable;
5)Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable;
6)Welding Cable, Control Cable, Concentric Cable, Coaxial, Rubber Sheathed Cable and so on;
 Our products have been widely supplied to power utilities, electrical materials distributors and dealers, construction and engineering firms, electrical contractors or industrial companies all over the world, such as South America,Central America,North America,Europe,Australia,Middle East, South-East Asia, Africa and so on. Welcome your OEM and ODM orders.

9.FAQ
1.)How many years has Huatong Cable Inc. been in production?
Founded in 1993 , has made outstanding contribution to STATE GRID, CHINA SOUTH POWER GRID and the construction of domestic and foreign power market

2. )What kinds of products does Huatong Cable manufacture?
(1)Bare Conductor ,such as AAC,AAAC,ACSR,ACAR,AACSR,ACSR/AW and so on;
(2)Aerial Bundled Cable (1kV-35kV ),such as Duplex,Triplex,Quadruplex Drop Wires and so on;
(3)PVC Insulated (Flexible ) Wire ;
(4)PVC Insulated and Sheathed (Armoured) Power Cable;
(5)Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable;
(6)Welding Cable, Control Cable, Concentric Cable, Rubber Sheathed Cable and so on;

3. )What kind of certifications do you have?
CCC, ISO9001-2000, SGS

4.)Which markets do you involve mainly in?
Our products have been exported mainly to Africa, Middle East, South-east Asia, South America,Central America,North America, Europe ,Australia, etc.

5. )Which standards do you comply with when you produce the electrical wires and cables ?
We are able to produce electrical wires and cables based on GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS, CSA, etc. Meanwhile, we can design and manufacture the cables according to the samples and technical specification the customer supply.

6.) What is the min.order quantity ?
It depends on the type and size of electrical wires and cables. For some small electrical wires, 100 meters can be accepted .But for the power cables with medium or high voltage, that should comply with the property of installed equipments. Anyhow,we will try our best to solve the problem and meet with the requirement If you have special request.

7. )What is the production capacity per week or per month ?
For the bare conductor, we can finish 5000 tons within one month. For power cables, that depends on the type and size.

8. )Do you supply the customers with installation service in foreign country ?
We don’t have professional installation teams in foreign country.But if that is necessary, we will recommend our partners to cooperate with you.

10.Workshop