Copper Core Copper Wire &Copper Tape Screen PVC Jacket Single Core Cable

CONSTRUCTIONAL FEATURES 
12/20 (24) Kv Single CU/XLPE/Copper Wire+Copper Tape Screen (CWS+CTS) /PVC Power Cable (IEC 60502-2) 
Conductor 
Aluminum Conductors upto 1000 sq mm will be circular compacted & stranded and shall comply with IEC-60228 Class 2. 

Conductor screen 
This will be an extruded layer of semiconducting XLPE applied under simultaneous triple extrusion process over the conductor along with the insulation and the insulation screen. 

Insulation 
This will be an extruded layer of insulating grade XLPE applied over conductor screen under triple extrusion process along with conductor screen and insulation screen. 

Insulation screen 
This will be a layer of semiconducting XLPE which will be applied by tripe extrusion process over the insulation. 

Metallic screen 
It will consist of a layer of copper tape applied helically with overlap over insulation screen. Other combinations of metallic screens as per customer’s requirement can also be provided on request. 

Inner Sheath (Bedding) 
Extruded layer of PVC or PE is applied over the laid-up cores. PVC is normally of grade ST2 or PE of grade ST7 as per IEC 60502 Part 2. 

Outer sheath 
An extruded layer is applied over the armour in case of armoured cables and over the laid up cores in case of unarmoured cables. Outer sheath material can be either PVC of grade ST2 or PE of grade ST7 as per IEC-60502 Part 2.