Cu XLPE PVC Insulated Power LV Cables Main Feeder Cable 1c 240mm2 1c 185mm2

TTU 1/0 2/0 3/0 4/0 Awg Cable

Applications.

The copper conductors type TTU are used for power and lighting circuits in industrial and commercial facilities, they are
specially suitable for outdoor facilities or directly buried, just as it is specified in the National Electrical Code. This type of
conductor can be used in dry and wet places, its maximum temperature of operation is 75 ºC and its voltage of service for
all the applications it is 2.000 V.

 Specifications.
The copper conductors type TTU, manufactured by ELECTROCABLES C.A., meets the following specifications and
standards:

• ASTM B-3 :Copper Annealed or Soft Wires.
• ASTM B-8 :Copper Stranded Conductors in Concentric Layers, Hard, Semi-hard or Soft.
• NEMA WC-5 :Wires and Cables Insulated with Thermoplastic Material 
  (ICEA S-61-402) for Transmission and Distribution of Electric Power.

Besides all the requirements of the National Electrical Code.

Construction.

The conductors type TTU are stranded and they are built with soft temper copper, they are also insulated with an uniform
layer of Polyethylene (PE) thermoplastic material resistant to the moisture and the heat, over which it is applied a protector
coating of Chloride of Polyvinyl (PVC). They are always supplied in black color and with different packaging.

Detail of the Cable.

Copper Conductor
Insulation of Thermoplastic Material, PE – 75 °C
Jacket of Thermoplastic Material, PVC

Copper Conductors type TTU 

CONDUCTOR MANUFACTURED UNDER STANDARDS:
NEMA WC-5 • ICEA S-61-402 • ASTM B3, B8 • INEN

AVAILABLE COLORS:
Cables (Sizes from 8 AWG 8 to 1000 MCM): Black. 
HIGHER SIZES (FROM 750 MCM UNTIL 1.000 MCM), UNDER REQUIREMENT.

 

PACKAGING:
A: Roll of 100 m. 
B: Reel of 1500 m. 
C: Reel of 1000 m. 
D: Reel of 500 m. 
E: Multiple Reels of 1000 m. 
Z – Length to the client’s requirement.

Any problem and inquiry pls contact with Tina