Electric Power Distribution 0.6/1kv Cu Conductor Stranded Three Core XLPE Insulation Power Cable

Electric Power Distribution 0.6/1kv Cu Conductor Stranded Three Core XLPE Insulation Power Cable

What is XLPE insulated power cable? 

XLPE insulated power cable has a number of advantages than paper insulted and PVC insulated cables. XLPE cable has high electric strength, mechanical strength, high-ageing resistance, environment stress resisting anti-chemical corrosion, and it is simple construction, using convenient and higher operating of long term temperature. It can be laid with no drop restriction.

XLPE cable advantages:

XLPE cable have higher long-term working temperature and greater current rating, and under the condition of the same environment, XLPE cable may be reduced size (normal cross section) 1 or 2 class in comparison with paper and PVC cable. These are not only improving the quality and properties of products, but also reduce cables’ production cost.

xlpe cables standard:

Our XLPE cables can be manufactured according to company’s specification which is equivalent to IEC60502, IEC60332, IEC60754, Some of indexes are superior to above international standard IEC.

 Armoured Cable is divided into steel armor, fine steel wire armoured, steel wire armoring.

Steel armored cable models: VV22, VVP22, ZRVV22, NH-VV2;

Control cable with steel tape armoured cable: KVV22, KVVP2, KVVP22 model, ZR-KVV22

Steel wire armoured power cable: VV32, YJV32, ZR-VV32 model

Steel wire armored control cable type: KVV32 KVVP32

Sheathed communication cable type: HYA53, HYAT53, HYA23, HYV22, HYA22 (buried)

Steel wire armoured cable (swa armoured cable) can bear general longitudinal tensile, so it is suitable for short distance overhead or vertical installation. In foreign countries, steel wire armored cable is common used.

Low voltage SWA armoured cable construction:
-Conductor:
Solid or stranded copper

-Insulation:
Cross-linked polyethylene

-Jacket:
Polyvinyl chloride (Black)

-Standards
IEC 60502-1

-Installation:

This 0.6/1KV CU/XLPE/SWA/PVC Armoured Cable can be installed in air, duct, conduit or direct burial. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, so that the safeguarding of persons and the integrity of the product will not be affected by deciencies in the installation.