Guaynaa for Self-Tightening Clamps for Optical Truss (OPGW)
Guaynaa for Self-Tightening Clamps for Optical Truss (OPGW) image
Get Latest Price Request a quote
Quick Details
Product Details
U Clamp
PART 1 GENERAL
1.01 SCOPE
This Specification covers the design, manufacturing, testing supply, delivery and performance requirements of D Bracket for use on overhead networks.
1.02 STANDARDS
The fittings comply with the latest editions of, and amendments to, the standards listed below:
BS – British Standards Institution
BS 3288 – Insulator and Conductor Fittings for Overhead Power Lines
BS EN ISO 1461 – Hot Dip Galvanized Coatings on Iron and Steel Articles
VDE – Verband Deutscher Elecktrotechniker
VDE 0202 – Requirements for aluminum for Electrical Technology
DIN – Deutsche Industrie Normen
DIN 6796 – Conic spring Washers
1.03 SERVICE CONDITIONS
Suitable for outdoor use in the Tropical zone,with a maximum ambient temperature of approximately 30degrees centigrade with heavy rainfall and high humidity of approximately 100% .
1.04 SYSTEM CONDITIONS
Comply the Customer requirment.
1.05 TESTING
A. Routine Tests
1. Routine tests carried out on all units of a particular type.
2. Mechanical routine testing will be carried out in accordance with BS 3288; Part 1.
3. The results of these tests will be recorded on a Routine Test Certificate.
4. Routine Test Certificates will include, in addition to the test results, the Purchaser’s Order Number.
B. Type Tests
1. Type tests will be carried out on individual units of a particular type.
2. Type tests will be in accordance with BS 3288: Part 1.
C. Sample Tests
1. Method of sampling and testing and test parameters shall be in accordance with BS 3288: Part 1.
2. Test results shall be recorded in the same manner as routine tests.
D. Inspection
The Purchaser reserves the right to witness the manufacturing process, any type tests specifically performed on the insulators to be supplied to ECG and any routine tests required in the manufacture and supply of the insulators and fittings. The Supplier shall provide free access to the Purchaser to any site where such manufacturing process, or tests, either type or routine tests are taking place. The Supplier shall bear the in plant costs of such inspection. The Supplier shall provide the Purchaser of a schedule of manufacture and tests at least two weeks before the events are to occur.
1.06 SPARES
(Not Applicable)
1.07 PACKING AND SHIPMENT
Export Standard
1.08 SUBMITTAL
As specified Of Customer
PART 2 PRODUCTS
2.01 DESIGN
According to the Drawing Attach
Recommended for You
Not exactly what you want?
Post Sourcing Request
Hot Searches
Electric Power Equipment
Power Line
Electric Power Supply
Electrical Hardware
Electric Power Cable
We are China Guaynaa for Self-Tightening Clamps for Optical Truss (OPGW) manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Aluminium Conductor Products
Aluminium Conductor Steel Reinforced, ACSR Conductors, AAAC Conductor, Aluminum Overhead Conductor
Conductor Aluminio Desnudo Azusa
AAC/AAAC/ACSR Conductor ASTM/BS/DIN Standards Cable
All Aluminum Alloy Conductor AAAC Cable Bare Aluminium Conductor
Elastic Strand Headband AAC/ACSR/AAAC Twisted Pair Conductor
Popular jgtrade1 Products
Fuseholder, 200 AMPS, 15kv, 110kv Bil, Chance Cat
Substation Surge Arrester 132kv 66kv 275kv
Polymer Fuse Cutout, Drop out Fuses 3kv 200A
Hy1.5W-0.5/2.6 Zinc-Oxide Arrester
12kv Expulsion Fuse C/W Holder.
Popular Pole Line Hardware Products
Torch Manufacturing Aluminum Pg Clamp in Good Quality
Pole Line Hardware Insulator Link Fitting Ball Clevis
HDG Utility Transmission Line Fitting Cross Plate Stainless Steel Anchor
Galvanized Steel Crossarm Pin 7/8' Long Shank Type
Hot DIP Galvanized Strip with Three Holes
Popular Tension Clamp Products
700 Span Tension Clamp for Stay Wire/ Cable Fixing Wire
Overhead Lines Tangent Support Clamp. 148". 250" Figure 8 Clamp Drop Wire Tension Clamp
Al-Cu Transition Connectors Type Syg, Compression Type, Group B
50m Span High Quality ADSS Guy Grip Dead End Tension Clamp
Tension Sets for 400m Span Two Armor Rods
Tension Clamps for Self Supporting LV-ABC Lines 2-4 Cores Jmac2-25b
Tags: Aluminium Conductor, jgtrade1, Pole Line Hardware, Tension Clamp