Hardware Fitting 201 Stainless Steel FTTH Wedge Fastener Clamp
Hardware Fitting 201 Stainless Steel FTTH Wedge Fastener Clamp image
Get Latest Price Request a quote
Quick Details
Product Details
Usage:
Connects less than two cables in straight-line layout to the anchoring point.
| Length | width | Height | Weight |
| 170mm | 14mm | 21mm | 50.5g |
Operation:
- Place the cable in the slot of the wedge-type anchor clamp
- Insert the conical wedge with a spring eye in the slot
- Connect the spring eye to the support at the anchoring port
- Hold the wedge- type anchor clamp in one hand and straighten the cable
- Push the wedge-type anchor clamp in the opposite direction to fasten the cable
- To remove the wedge-type anchor clamp, loosen the wedge
Warehouse:
Abroad Installation Guide:
We are China Hardware Fitting 201 Stainless Steel FTTH Wedge Fastener Clamp manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Anchor Clamp Products
Plastic Tension Clamp PA1500 Anchor Clamp with Pole Clamp
Aluminium Alloy Wire Rope Anchor Clamp
FTTH Stainless Steel Cable Wedge Clamp
Low Voltage Anchor Clamp/Dead End Clamp
Popular Cable Accessories Products
Szfb Factory Direct Shrinkage Pipe
66kv Silicone Rubber Fully Prefabricated Dry Terminal for High Voltage Cable with CE
Guy Thimble for Dead End Sets Cheaper Price Hot Selling
Medium Voltage Heat Shrinkable Rain Skirt Rainshed for Outdoor Cable Terminations
Electrical Power Fittings Hot DIP Galvanized Stay Thimble, Wire Rope Thimble
Aluminium Copper and Bimetallic Parallel Groove Connector
Popular Hardware Products
Transmission Line Fittings of Adjuster Plates
Link-Fittings of Forged Ball Eye Qh-10 Electric Power Fittings
Hardware Fitting Tooth Type SS304 Stainless Steel Buckle
D Iron Secondary Bracket (F0610)
Overhead Line Fittings of Socket Clevis Hardware Clevis
O Type Ball End Oval Eye Electric Power Fittings
Popular powtech Products
High Quality Optical Fiber Patch Cord
FTTH Plastic Cable Clip with Steel Needle
Insulator Ties Semi-Conductive Plastic Cable Ties
ADSS 200m Span Monolayer Suspension Clamp
1kVA Single Phase High Frequency Online UPS Power Supply
Galvanized Steel 1/4 Inch-7/16 Inch D Cable Lashing Wire Clamp
Tags: Anchor Clamp, Cable Accessories, Hardware, powtechSimilar Or Related
-
1kv Low-Voltage Cold Shrink Cable Terminal Head Indoor and Outdoor Accessories
-
8.7/15kv EPDM Rubber Cold Shrink Tube for Cable Joint
-
Factory Price 10kv Termination Kits Outdoor Cable Accessories Cold Shrink Termination
-
Copper Nose Heat Shrink Terminal Accessories Copper Terminal National Standard a Level
-
Oqj/Ozj/Ohj 10/20/35kv 250/630/1250A Power Cable Joint European Type Rear Connected Arreste Cabel Accessories
If you have any questions or would like to book a session please contact us.
