High Quality Bimetallic Transformer Connector

Description:
The  end of bimetallic transformer connector adopts screw and side seam design,the clamp is installed behind conducting rod of equipment and then tight up the screw in the two side of seam,the other side adopts press plate,flat plate,round sleeve and other ways respectively to connect with conductors,cable lugs and busbar.It has the advantages of large contact area,tight and firm contact and wide range of application.

Application:
The bimetallic transformer connector is used for earthing system of power plant ,transformer station ,tower ,communication station ,airport, railway, subway station , high building ,computer room ,oil reservoir in the environmental of moist ,saline and alkaline ,acid and chemical corrosion medium environmental.These products are widely used on the output line pole heads of electric transformers or of oil switches on the poles. Among them,SBJ-2 series pole holding type equipment copper clamp are directly connected with copper conductive wires.
 
>>——————————————————————

>>——————————————————————